https://www.soliforum.com/topic/1563/a-couple-of-sd3-observations/ Sun, 03 Mar 2013 06:40:05 +0000 PunBB https://www.soliforum.com/post/14867/#p14867 satman, does your wire come out of the top middle hole like this one?  The SD2's wire bundle came out of the top left.  I thougt that this new placement would of stopped that from happening.

]]> Sun, 03 Mar 2013 06:40:05 +0000 https://www.soliforum.com/post/14867/#p14867 https://www.soliforum.com/post/14862/#p14862 i have the clip on one cmetzel and it works fien its the thing i accidentally printed the hair into

]]> Sun, 03 Mar 2013 05:05:56 +0000 https://www.soliforum.com/post/14862/#p14862 https://www.soliforum.com/post/14851/#p14851 There are fixes for the wire bundle rubbing on the SD2's that I'm sure would work on the SD3.  Check in hacks and mods I've got a magnetic one and there's some clip on ones that mine was based off of.

]]> Sun, 03 Mar 2013 03:29:05 +0000 https://www.soliforum.com/post/14851/#p14851 https://www.soliforum.com/post/14846/#p14846 I  had my SD3 a week now. Some good prints some  bad.First I noticed tonight that the mat under the bed was drooping, (I assume it is glued on) , I can push it up back in place. It might stay put for a little while but still shouldn't do that. Second
when the extruder is in the upper left quadrant the braided wire bundle rubs and sometimes even pushes on the Y belt.
Anybody with a SD3 have that issue?

]]> Sun, 03 Mar 2013 02:38:44 +0000 https://www.soliforum.com/post/14846/#p14846