<![CDATA[SoliForum - 3D Printing Community — Printing with a 0.2mm airbrush nozzle]]> https://www.soliforum.com/topic/15474/printing-with-a-02mm-airbrush-nozzle/ Mon, 05 Sep 2016 14:44:35 +0000 PunBB <![CDATA[Re: Printing with a 0.2mm airbrush nozzle]]> https://www.soliforum.com/post/126772/#p126772 Now the geckos do not have a big brother...:)

http://up.picr.de/26731156xq.jpg

]]> Mon, 05 Sep 2016 14:44:35 +0000 https://www.soliforum.com/post/126772/#p126772 <![CDATA[Printing with a 0.2mm airbrush nozzle]]> https://www.soliforum.com/post/126750/#p126750 Hi,

currently I am a little thing to do when trying out with a 0.2mm airbrush nozzle that.
The here are the prints that I made today.

http://up.picr.de/26715081kr.jpg

http://up.picr.de/26715083sg.jpg

http://up.picr.de/26715085rh.jpg

http://up.picr.de/26715087ta.jpg

The geco is printed with PLA and a layer height of 0.1 mm, the small just 5 minutes and the large after 45 minutes was finished.

But I have so even large characters printed as this dragon with 378mm height.

http://up.picr.de/26414252lf.jpg

The course I also printed in small.

http://up.picr.de/26420297ky.jpg

greetings Edwin

]]> Sun, 04 Sep 2016 12:13:53 +0000 https://www.soliforum.com/post/126750/#p126750