SoliForum - 3D Printing Community — Detailed printing problems.

Re: Detailed printing problems.

null@example.com (Tin Falcon) — Tue, 30 Aug 2016 22:42:55 +0000

Another option is to print several objects at one time gives more time for plastic to cool.

Re: Detailed printing problems.

null@example.com (OG Style) — Tue, 30 Aug 2016 22:37:10 +0000

ok. Thanks for the help. I'll do some research and try messing with the settings.

Re: Detailed printing problems.

null@example.com (Kronikabuse) — Tue, 30 Aug 2016 22:24:53 +0000

i dont know about on the davincis. but other control boards you can

Re: Detailed printing problems.

null@example.com (OG Style) — Tue, 30 Aug 2016 21:43:57 +0000

Is there a way to attach it and control it with that Slic3r option?

Re: Detailed printing problems.

null@example.com (Kronikabuse) — Tue, 30 Aug 2016 21:41:49 +0000

lots of people attach fans to the extruder to blow on the part as it prints. helps a lot

Re: Detailed printing problems.

null@example.com (OG Style) — Tue, 30 Aug 2016 21:29:35 +0000

Thanks. What fan is it referring to under keep fan always on? I only fan I have is to keep the extruder cool.

Re: Detailed printing problems.

null@example.com (Kronikabuse) — Tue, 30 Aug 2016 21:25:02 +0000

its under cooling, in the filament settings tab on slic3r "slow down if layer print time is below:"

Re: Detailed printing problems.

null@example.com (OG Style) — Tue, 30 Aug 2016 13:11:12 +0000

I haven't seen any option for that in the Repetier Host or Slic3r software.

Thanks

Re: Detailed printing problems.

null@example.com (scobo) — Tue, 30 Aug 2016 06:54:37 +0000

Use a layer fan and set your slicer to reduce print speed for layers that take less than something like 5 seconds, if your slicer has this option.

Re: Detailed printing problems.

null@example.com (OG Style) — Mon, 29 Aug 2016 21:49:50 +0000

That's kind of what I figured for the first picture. I have done printing multiple items on small prints. Is there any settings that I can adjust in the Repetier Host software? I'm not sure how to print a tall skirt in the settings.

Thanks

Re: Detailed printing problems.

null@example.com (Kronikabuse) — Mon, 29 Aug 2016 21:41:59 +0000

You need more cooling. the previously printed layer doesnt have enough time to cool before it heats back up from the next layer. try a fan on it as it prints. or print multiple items at once, or print a tall skirt along with it.

Detailed printing problems.

null@example.com (OG Style) — Mon, 29 Aug 2016 21:17:15 +0000

I am using repetier on my Da Vinci 1.0 and everthing else is stock. I have a few problems with printing and I don't know what I need to do to fix them. I have two pictures to show the problems. The ears are messed up on one and the underside of the face is messed up on the other. I can't figure out how to fix this issue.

Thanks