<![CDATA[SoliForum - 3D Printing Community — could use a little advice on Titan/Volcano combo]]> https://www.soliforum.com/topic/15431/could-use-a-little-advice-on-titanvolcano-combo/ Wed, 13 Sep 2017 12:04:01 +0000 PunBB <![CDATA[Re: could use a little advice on Titan/Volcano combo]]> https://www.soliforum.com/post/137990/#p137990 This thread is over a year old.. Please pay attention to the dates.

Thank you.

]]> Wed, 13 Sep 2017 12:04:01 +0000 https://www.soliforum.com/post/137990/#p137990 <![CDATA[Re: could use a little advice on Titan/Volcano combo]]> https://www.soliforum.com/post/137970/#p137970 I run Volcanos on all of my printers at .8mm. You have to increase the temperature to account for the flow volume. I currently print PLA at 250C (that's on 6 different printers) in order to get good flow and surface adhesion. Telltale sign is the part is brittle, meaning the temp is to low.

]]> Wed, 13 Sep 2017 02:59:28 +0000 https://www.soliforum.com/post/137970/#p137970 <![CDATA[Re: could use a little advice on Titan/Volcano combo]]> https://www.soliforum.com/post/126522/#p126522 Thank you very much, AZERATE! that gives me a starting point at least. smile

Now to find some time to tinker with it... too many projects going on at once - Have a large order that I am trying to get filled before the end of the month plus another project from the same customer, and a new toy that just arrived that I need to get up and running wink and of course there is the day job and the normal day to day stuff... too much to do and not enough hours in the day to do it all. tongue

]]> Thu, 25 Aug 2016 11:33:20 +0000 https://www.soliforum.com/post/126522/#p126522 <![CDATA[Re: could use a little advice on Titan/Volcano combo]]> https://www.soliforum.com/post/126510/#p126510 The problems you are having are from the Volcano. The main change aside from nozzle is going to be your retraction settings. I added screenshots of any crucial setting. You won't need all this info by any means, but a nice couple numbers to take a gander at.

http://i.imgur.com/VtfLii4.jpg
http://i.imgur.com/h2Gt6pC.jpg
http://i.imgur.com/hJ9Lpea.jpg
http://i.imgur.com/Kcb71TB.jpg
http://i.imgur.com/ev2kKHs.jpg
http://i.imgur.com/BsbBHYY.jpg

]]> Wed, 24 Aug 2016 20:29:59 +0000 https://www.soliforum.com/post/126510/#p126510 <![CDATA[Re: could use a little advice on Titan/Volcano combo]]> https://www.soliforum.com/post/126502/#p126502 I currently have the v6/Volcano/.6/Titan setup on one of my printers.
Unfortunately I won't be back by my computer until this afternoon, but I would be happy to share my settings if you would like.

Until then, I was able to find this thread after some digging.
http://www.soliforum.com/topic/9985/e3d … -settings/

]]> Wed, 24 Aug 2016 13:27:58 +0000 https://www.soliforum.com/post/126502/#p126502 <![CDATA[Re: could use a little advice on Titan/Volcano combo]]> https://www.soliforum.com/post/126499/#p126499 Thanks guys.

Tin - the first thing I check is always structural (especially on a kit printer) - everything is solid and tight. the only change made was the installation of the Titan and Volcano. Prior to that change it was printing great.

I am reasonably certain that the issue is in my settings - due to the larger melt zone, & increased nozzle size (more volume extruded), I am just unsure about what I need to change. tongue

]]> Wed, 24 Aug 2016 11:20:07 +0000 https://www.soliforum.com/post/126499/#p126499 <![CDATA[Re: could use a little advice on Titan/Volcano combo]]> https://www.soliforum.com/post/126496/#p126496 Well heartless you know in this sport things just sometimes go sideways. I tried a print Monday night 2 hour print first layer just would not work.
Last night printed a different pat worked fine go figure.
being the first few layers are good then not so . check set stews and belts also look at extruder temp . Sometimes the first layer is set higher then drops 5 degrees .   
You have a relatively new printer something may have shaken loose .
thee is a thing called instrument grade lock tight that may help,  if thing are shaking loose.
Sure you will sort it out.
Tin

]]> Wed, 24 Aug 2016 10:32:58 +0000 https://www.soliforum.com/post/126496/#p126496 <![CDATA[Re: could use a little advice on Titan/Volcano combo]]> https://www.soliforum.com/post/126493/#p126493 .6 on a Volcano is my go to set up and although I have had several Titans pass through my hands, I have yet to get the opportunity to use one.  Customers come first and so I end up shipping them right back out. I am certain we can get you up and running and hopefully AZERATE will chime in here with proper settings.  If not, you know how to reach me.

]]> Wed, 24 Aug 2016 03:13:42 +0000 https://www.soliforum.com/post/126493/#p126493 <![CDATA[could use a little advice on Titan/Volcano combo]]> https://www.soliforum.com/post/126491/#p126491 So I recently got the E3D Volcano with a 0.6mm nozzle and Titan extruder installed on my FT-5 and attempted my first print last night - it started out OK, but quickly went downhill

Firmware was updated for the Volcano and E Steps/mm were set - when I ask for 100mm, I get 100mm

What I am not sure about is temp range, max extrusion volume, and anything else I may need to adjust to get successful prints with this thing...

this was PLA set about 210-215C

http://soliforum.com/i/?wJ0NatE.jpg

as you can see, the first few layers look fine, but then... hmm

]]> Wed, 24 Aug 2016 02:27:04 +0000 https://www.soliforum.com/post/126491/#p126491