<![CDATA[SoliForum - 3D Printing Community — Gluing PLA]]> https://www.soliforum.com/topic/15391/gluing-pla/ Sat, 20 Aug 2016 21:59:15 +0000 PunBB <![CDATA[Re: Gluing PLA]]> https://www.soliforum.com/post/126422/#p126422 Thanks 3Dex. The UHU products are great, but unfortunately most of them are not available to me in Canada. Our government does not like us to have too many products that actually work! We have to go with all the environmentally friendly stuff that is mostly junk. Even the super glue that we get here only really works on fingers!!


Edit In ...
OOOps ... Gotta eat some words here. After a light sanding, Gorilla Gel Super Glue does the trick. I can't get the parts apart without breaking them.

]]> Sat, 20 Aug 2016 21:59:15 +0000 https://www.soliforum.com/post/126422/#p126422 <![CDATA[Re: Gluing PLA]]> https://www.soliforum.com/post/126408/#p126408 We have found that using a glue that has some flex in it when cured always works well. Something like epoxy has no flex and therefore can crack and break.

Most contact adhesives have a certain amount of flexibility in them when cured but a great one is UHU Por.

I hope this helps

]]> Sat, 20 Aug 2016 15:19:23 +0000 https://www.soliforum.com/post/126408/#p126408 <![CDATA[Re: Gluing PLA]]> https://www.soliforum.com/post/126353/#p126353 Thanks Again ... I'll get some this morning.

]]> Thu, 18 Aug 2016 09:31:05 +0000 https://www.soliforum.com/post/126353/#p126353 <![CDATA[Re: Gluing PLA]]> https://www.soliforum.com/post/126341/#p126341 I have used the gel type super glue with good success. it does take a little longer to set up but seems to work well

]]> Wed, 17 Aug 2016 22:32:38 +0000 https://www.soliforum.com/post/126341/#p126341 <![CDATA[Re: Gluing PLA]]> https://www.soliforum.com/post/126336/#p126336 Thank You  ... I will get some tomorrow and try it.

]]> Wed, 17 Aug 2016 20:48:33 +0000 https://www.soliforum.com/post/126336/#p126336 <![CDATA[Re: Gluing PLA]]> https://www.soliforum.com/post/126331/#p126331 I have used this stuff with PLA a few times. The parts I glued are still firmly stuck together.

http://www.homedepot.com/p/Loctite-GO2- … /205478359

]]> Wed, 17 Aug 2016 16:25:31 +0000 https://www.soliforum.com/post/126331/#p126331 <![CDATA[Gluing PLA]]> https://www.soliforum.com/post/126327/#p126327 I need to glue some PLA bits together and I can't find anything that will make it stick together. The crazy glue we get in Canada now doesn't seem to touch it. I have tried epoxy, model plastic cement, lacquer thinners, and JB weld. The JB sort of works, but not what I want.

Any suggestions?

]]> Wed, 17 Aug 2016 12:26:39 +0000 https://www.soliforum.com/post/126327/#p126327