<![CDATA[SoliForum - 3D Printing Community — Bricked Da Vinci 1.1 plus]]> https://www.soliforum.com/topic/15359/bricked-da-vinci-11-plus/ Tue, 27 Sep 2016 00:05:10 +0000 PunBB <![CDATA[Re: Bricked Da Vinci 1.1 plus]]> https://www.soliforum.com/post/127164/#p127164 ive read elsewhere that holding the up and down buttons on the face of the unit while powering it up will bring it to bootloader as well some say left and right held at power up .... worth a try

]]> Tue, 27 Sep 2016 00:05:10 +0000 https://www.soliforum.com/post/127164/#p127164 <![CDATA[Re: Bricked Da Vinci 1.1 plus]]> https://www.soliforum.com/post/126168/#p126168 polarnomad wrote:

:-) drop from a second story window would be more fun :-)

LOL, most likely. big_smile

]]> Sat, 13 Aug 2016 00:17:37 +0000 https://www.soliforum.com/post/126168/#p126168 <![CDATA[Re: Bricked Da Vinci 1.1 plus]]> https://www.soliforum.com/post/126167/#p126167 :-) drop from a second story window would be more fun :-)

]]> Fri, 12 Aug 2016 22:57:55 +0000 https://www.soliforum.com/post/126167/#p126167 <![CDATA[Re: Bricked Da Vinci 1.1 plus]]> https://www.soliforum.com/post/126133/#p126133 If you are feeling adventurous, you could always try swapping out the controller board & firmware for something open source... tongue

]]> Fri, 12 Aug 2016 11:25:47 +0000 https://www.soliforum.com/post/126133/#p126133 <![CDATA[Bricked Da Vinci 1.1 plus]]> https://www.soliforum.com/post/126122/#p126122 Hopefully i can recover my bricked 1.1 plus, i reset the chip and the realised that 1.1 plus is not supported with the non OEM firmware.

I would be greatful for any ideas to recover thos unit.

Thanks in advance.

]]> Fri, 12 Aug 2016 05:07:46 +0000 https://www.soliforum.com/post/126122/#p126122