https://www.soliforum.com/topic/14876/help-with-printing/ Tue, 31 May 2016 00:53:24 +0000 PunBB https://www.soliforum.com/post/123565/#p123565 most likely has the wrong nozzle size set in the configuration - their default is a 0.5 - most printers have a 0.4 stock, some smaller

]]> Tue, 31 May 2016 00:53:24 +0000 https://www.soliforum.com/post/123565/#p123565 https://www.soliforum.com/post/123538/#p123538 Try to find , restore use you old profiles.
where did your settings come from to begin with??
What printer are you using.

]]> Sun, 29 May 2016 20:45:05 +0000 https://www.soliforum.com/post/123538/#p123538 https://www.soliforum.com/post/123536/#p123536 Using newest Repieter since the original was corrupted. The filaments seem to deposit on the print bed too far apart and don't stick together. They are more like individual strings laid next to each other. The original software worked fine.  I am a newbie so any help would be appreciated

]]> Sun, 29 May 2016 20:24:25 +0000 https://www.soliforum.com/post/123536/#p123536