<![CDATA[SoliForum - 3D Printing Community — Solidoodle 4 UltiMachine RAMBo 1.3 Upgrade]]> https://www.soliforum.com/topic/14852/solidoodle-4-ultimachine-rambo-13-upgrade/ Wed, 25 May 2016 16:36:51 +0000 PunBB <![CDATA[Re: Solidoodle 4 UltiMachine RAMBo 1.3 Upgrade]]> https://www.soliforum.com/post/123374/#p123374 Mine runs all the time. Doesn't give me problems

]]> Wed, 25 May 2016 16:36:51 +0000 https://www.soliforum.com/post/123374/#p123374 <![CDATA[Re: Solidoodle 4 UltiMachine RAMBo 1.3 Upgrade]]> https://www.soliforum.com/post/123371/#p123371 Kronikabuse wrote:

Try adding a fan that blows on the part near the hot end. Should be a big help for bridging. It's what I had to do besides dialing in the settings

Yeah but then I'd have to have it always on with the stock board which wouldn't be good for the other layers

]]> Wed, 25 May 2016 14:45:53 +0000 https://www.soliforum.com/post/123371/#p123371 <![CDATA[Re: Solidoodle 4 UltiMachine RAMBo 1.3 Upgrade]]> https://www.soliforum.com/post/123367/#p123367 KingBooo wrote:

I'm quite interested in your entire build big_smile
I've recently got given a stock Solidoodle 4 and I want to upgrade the Hotend and board so that I can print bridges in ABS with a cooling fan. Right now it can't do bridges at all >_>
Also where'd you get those nice looking switches?

Try adding a fan that blows on the part near the hot end. Should be a big help for bridging. It's what I had to do besides dialing in the settings

]]> Wed, 25 May 2016 13:40:00 +0000 https://www.soliforum.com/post/123367/#p123367 <![CDATA[Re: Solidoodle 4 UltiMachine RAMBo 1.3 Upgrade]]> https://www.soliforum.com/post/123365/#p123365 The RAMBo 1.3 has several IO for fans, additional extruders, and sensors.  The E3D V6 hot end was the first improvement I made to the machine after the stock extruder died.  Eventually the stock mother board output for the extruder died so I went ahead and upgraded to RAMBo.  I recycled everything from the Solidoodle 4 except the mother board connectors and limit switches.  Also, light bar switches came from OTRATTW but you can find them on DigiKey and Mouser if you look hard enough.

]]> Wed, 25 May 2016 13:35:27 +0000 https://www.soliforum.com/post/123365/#p123365 <![CDATA[Re: Solidoodle 4 UltiMachine RAMBo 1.3 Upgrade]]> https://www.soliforum.com/post/123362/#p123362 I'm quite interested in your entire build big_smile
I've recently got given a stock Solidoodle 4 and I want to upgrade the Hotend and board so that I can print bridges in ABS with a cooling fan. Right now it can't do bridges at all >_>
Also where'd you get those nice looking switches?

]]> Wed, 25 May 2016 13:15:34 +0000 https://www.soliforum.com/post/123362/#p123362 <![CDATA[Solidoodle 4 UltiMachine RAMBo 1.3 Upgrade]]> https://www.soliforum.com/post/123326/#p123326 Spent the last month or so transplanting the RAMBo 1.3 motherboard into my Solidoodle 4 frame.  I don't have the motherboard packaged yet but the machine is calibrated and printing well.  If anybody is interested in this build I can post the configuration.h files and give a description better than the images show.  Final build has the RAMBo 1.3 motherboard, Fleks 3D print bed, and E3D V6 nozzle.

http://soliforum.com/i/?9nFXp9j.jpg
http://soliforum.com/i/?hymBvfd.jpg
http://soliforum.com/i/?oY0Q5db.jpg
http://soliforum.com/i/?P9Easrd.jpg

]]> Tue, 24 May 2016 19:24:01 +0000 https://www.soliforum.com/post/123326/#p123326