<![CDATA[SoliForum - 3D Printing Community — Solidoodle 4 E3D V6]]> https://www.soliforum.com/topic/14519/solidoodle-4-e3d-v6/ Fri, 08 Apr 2016 01:51:34 +0000 PunBB <![CDATA[Re: Solidoodle 4 E3D V6]]> https://www.soliforum.com/post/120726/#p120726 wardjr wrote:

Sorry for the confusion earlier, let us know how we can help.

No biggie, I'll be sure to post back if I need assistance. Thanks again

]]> Fri, 08 Apr 2016 01:51:34 +0000 https://www.soliforum.com/post/120726/#p120726 <![CDATA[Re: Solidoodle 4 E3D V6]]> https://www.soliforum.com/post/120725/#p120725 Sorry for the confusion earlier, let us know how we can help.

]]> Fri, 08 Apr 2016 01:49:09 +0000 https://www.soliforum.com/post/120725/#p120725 <![CDATA[Re: Solidoodle 4 E3D V6]]> https://www.soliforum.com/post/120724/#p120724 Thanks for the info guys. I just bought an mk6 kit and a fully assmembled v6.

]]> Fri, 08 Apr 2016 01:43:42 +0000 https://www.soliforum.com/post/120724/#p120724 <![CDATA[Re: Solidoodle 4 E3D V6]]> https://www.soliforum.com/post/120710/#p120710 Good catch!!! IronMan is correct a press hot end is 24 volt and SD4 is 12volt.

]]> Thu, 07 Apr 2016 20:05:15 +0000 https://www.soliforum.com/post/120710/#p120710 <![CDATA[Re: Solidoodle 4 E3D V6]]> https://www.soliforum.com/post/120708/#p120708 jrcyscon wrote:
wardjr wrote:

Flip the bolt upside down or use a longer bolt

Ah alrighty. And just out of curiosity, if i have a spare Solidoodle Press laying around, then would i be able to use those parts for my solidoodle 4? For example, can i just take the hot end from the Press and screw it onto the 4?

Does the SD4 run on 24v? If yes, no problem; if the SD4 runs on 12v then the Press heater cartridge, bed, and fans would not be of much use...

]]> Thu, 07 Apr 2016 19:44:11 +0000 https://www.soliforum.com/post/120708/#p120708 <![CDATA[Re: Solidoodle 4 E3D V6]]> https://www.soliforum.com/post/120704/#p120704 wardjr wrote:

That I am unsure of but if it fits physically, it should work.

Ah alright and yes it has the knob that sticks through the back

]]> Thu, 07 Apr 2016 18:57:11 +0000 https://www.soliforum.com/post/120704/#p120704 <![CDATA[Re: Solidoodle 4 E3D V6]]> https://www.soliforum.com/post/120703/#p120703 That I am unsure of but if it fits physically, it should work.

]]> Thu, 07 Apr 2016 18:33:37 +0000 https://www.soliforum.com/post/120703/#p120703 <![CDATA[Re: Solidoodle 4 E3D V6]]> https://www.soliforum.com/post/120701/#p120701 wardjr wrote:

Flip the bolt upside down or use a longer bolt

Ah alrighty. And just out of curiosity, if i have a spare Solidoodle Press laying around, then would i be able to use those parts for my solidoodle 4? For example, can i just take the hot end from the Press and screw it onto the 4?

]]> Thu, 07 Apr 2016 18:17:27 +0000 https://www.soliforum.com/post/120701/#p120701 <![CDATA[Re: Solidoodle 4 E3D V6]]> https://www.soliforum.com/post/120700/#p120700 Or does your printer have the knob that sticks through the back?

]]> Thu, 07 Apr 2016 18:15:21 +0000 https://www.soliforum.com/post/120700/#p120700 <![CDATA[Re: Solidoodle 4 E3D V6]]> https://www.soliforum.com/post/120699/#p120699 Flip the bolt upside down or use a longer bolt

]]> Thu, 07 Apr 2016 18:13:11 +0000 https://www.soliforum.com/post/120699/#p120699 <![CDATA[Re: Solidoodle 4 E3D V6]]> https://www.soliforum.com/post/120687/#p120687 wardjr wrote:

It is easy if you buy the fully assembled E3d from http://www.printitindustries.com/
The wiring is fairly simple but you'll need to understand the firmware changes.  We can help you through all of that so don't worry, if you have questions just ask.

Crap, so it looks like i need an extender support and an extended z stop. Is there any other way i can still complete the installation without those two things?

]]> Thu, 07 Apr 2016 15:26:20 +0000 https://www.soliforum.com/post/120687/#p120687 <![CDATA[Re: Solidoodle 4 E3D V6]]> https://www.soliforum.com/post/120685/#p120685 It is easy if you buy the fully assembled E3d from http://www.printitindustries.com/
The wiring is fairly simple but you'll need to understand the firmware changes.  We can help you through all of that so don't worry, if you have questions just ask.

]]> Thu, 07 Apr 2016 14:45:36 +0000 https://www.soliforum.com/post/120685/#p120685 <![CDATA[Solidoodle 4 E3D V6]]> https://www.soliforum.com/post/120677/#p120677 Hi everyone, im new here. My hot end broke. About to buy jigsaw and e3d v6. Is installation easy? Im not the best with wiring.

]]> Thu, 07 Apr 2016 13:18:19 +0000 https://www.soliforum.com/post/120677/#p120677