<![CDATA[SoliForum - 3D Printing Community — SLA XYZPrinting Nobel 1 RFID Tag]]> https://www.soliforum.com/topic/14494/sla-xyzprinting-nobel-1-rfid-tag/ Fri, 12 Apr 2019 06:05:03 +0000 PunBB <![CDATA[Re: SLA XYZPrinting Nobel 1 RFID Tag]]> https://www.soliforum.com/post/150144/#p150144 I am also trying to do this bypass hack to an RFID system on an envisiontech Vector 3sp machine.  I would love to know if anyone has had success with this or has successfully used opensource resin with this machine.

]]> Fri, 12 Apr 2019 06:05:03 +0000 https://www.soliforum.com/post/150144/#p150144 <![CDATA[Re: SLA XYZPrinting Nobel 1 RFID Tag]]> https://www.soliforum.com/post/149713/#p149713 Any updates on this post?

I also would like to use any resin on my Nobel 1A but it seams that XYZ don't want me to do so.
I have a proxmark3 so if anyone out there who wants to be challenged is welcome.

]]> Fri, 15 Mar 2019 11:46:47 +0000 https://www.soliforum.com/post/149713/#p149713 <![CDATA[Re: SLA XYZPrinting Nobel 1 RFID Tag]]> https://www.soliforum.com/post/139195/#p139195 I'll see if I can find anything. Would like to hear from an RFID experienced electrical engineer and if it can be re-programmed and if so, with what.

I'll do some research myself.

]]> Wed, 25 Oct 2017 16:57:29 +0000 https://www.soliforum.com/post/139195/#p139195 <![CDATA[Re: SLA XYZPrinting Nobel 1 RFID Tag]]> https://www.soliforum.com/post/139166/#p139166 EDAGR8 wrote:

Can we get this topic back on track?
Would like to be able to hack the RFID tags for the Nobel 1.0.
Does anyone have electronics knowledge for that?


You should follow the same topic in the XYZ forum on the JR here. The technology is probably the same or similar. Your not going to find much support on the Nobel here as it is an XYZ machine and locked to it's own resin so it has a very small following especially here.

]]> Tue, 24 Oct 2017 16:29:27 +0000 https://www.soliforum.com/post/139166/#p139166 <![CDATA[Re: SLA XYZPrinting Nobel 1 RFID Tag]]> https://www.soliforum.com/post/139165/#p139165 Can we get this topic back on track?
Would like to be able to hack the RFID tags for the Nobel 1.0.
Does anyone have electronics knowledge for that?

]]> Tue, 24 Oct 2017 15:56:16 +0000 https://www.soliforum.com/post/139165/#p139165 <![CDATA[Re: SLA XYZPrinting Nobel 1 RFID Tag]]> https://www.soliforum.com/post/131325/#p131325 Hey Guys ,
what kind of nfc reader do i need to read the chip on the bottles ? my samsung Galaxy S6 edge dont read it

]]> Fri, 20 Jan 2017 08:37:28 +0000 https://www.soliforum.com/post/131325/#p131325 <![CDATA[Re: SLA XYZPrinting Nobel 1 RFID Tag]]> https://www.soliforum.com/post/127517/#p127517 Really hope someone gets a crack for the RFID tags.  The price tag is more then double Makerjuice prices and not available on amazon right now.  $146 for a liter shipped from XYZ Printing

]]> Wed, 12 Oct 2016 14:43:20 +0000 https://www.soliforum.com/post/127517/#p127517 <![CDATA[Re: SLA XYZPrinting Nobel 1 RFID Tag]]> https://www.soliforum.com/post/127292/#p127292 Understood - but on this occasion I have a problem with the viscosity of their resin.  I am familiar with resin printers as I have been building my own so just want the opportunity to have a play.  Also - I had an RFID tag fail on one of my bottles fail so I have a displaced 500ml that I have to go through the XYZ customer service to get replaced.  As they responded 3 days after my initial enquiry, I would just rather circumvent the system all together.

]]> Sat, 01 Oct 2016 14:20:07 +0000 https://www.soliforum.com/post/127292/#p127292 <![CDATA[Re: SLA XYZPrinting Nobel 1 RFID Tag]]> https://www.soliforum.com/post/127208/#p127208 Just a word of caution. Based on my own experience with a Formlabs printer I found trying to use resin not formulated for a specific printer is a nightmare. I understand wanting to save money, but nothing worked with my Formlabs as good as their own brand did. Other stuff was just too brittle, did not cure correctly or at all. So a word to wise, in the case of the Nobel forget cracking it and just buy their resin. You will most likely get much better results. Since it is hard to tune an SLA like you can an FFD printer.

]]> Wed, 28 Sep 2016 23:32:01 +0000 https://www.soliforum.com/post/127208/#p127208 <![CDATA[Re: SLA XYZPrinting Nobel 1 RFID Tag]]> https://www.soliforum.com/post/127196/#p127196 Any updates on this chaps?

]]> Wed, 28 Sep 2016 13:06:26 +0000 https://www.soliforum.com/post/127196/#p127196 <![CDATA[Re: SLA XYZPrinting Nobel 1 RFID Tag]]> https://www.soliforum.com/post/122951/#p122951 Its probably the same system used in the Jr. and they cracked it I believe over in that thread.

]]> Tue, 17 May 2016 02:15:41 +0000 https://www.soliforum.com/post/122951/#p122951 <![CDATA[Re: SLA XYZPrinting Nobel 1 RFID Tag]]> https://www.soliforum.com/post/122947/#p122947 I am betting that the manufacturer was a little lazy here. I am going to send the code that I can read to TheGreatOne and pay to see if it unlocks the chip. I know enough of little endian and coding to figure out what information is being sent to the system. Will keep up to date on this post.

]]> Tue, 17 May 2016 01:57:53 +0000 https://www.soliforum.com/post/122947/#p122947 <![CDATA[Re: SLA XYZPrinting Nobel 1 RFID Tag]]> https://www.soliforum.com/post/121326/#p121326 The JR, just got cracked after about 6 months and its small user base. The Nobel is even newer and has a much smaller user base. I would not expect a crack if any for a year or more. The speed of the crack has a very strong dependence on the number of users. This model due to cost and the RFID system which contradicts their original claim of it being open source has given this model a very small user base.

]]> Mon, 18 Apr 2016 18:01:27 +0000 https://www.soliforum.com/post/121326/#p121326 <![CDATA[Re: SLA XYZPrinting Nobel 1 RFID Tag]]> https://www.soliforum.com/post/121307/#p121307 Anyone made any progress on this?

]]> Mon, 18 Apr 2016 14:19:28 +0000 https://www.soliforum.com/post/121307/#p121307 <![CDATA[Re: SLA XYZPrinting Nobel 1 RFID Tag]]> https://www.soliforum.com/post/120630/#p120630 carl_m1968 wrote:

How exactly do you tag a liquid with RFID?

The bottles are tagged and put into a cartridge slot with a tube connected to the bottle to feed the resin into the printer

]]> Wed, 06 Apr 2016 18:49:09 +0000 https://www.soliforum.com/post/120630/#p120630