<![CDATA[SoliForum - 3D Printing Community — Keeping nozzle clean]]> https://www.soliforum.com/topic/14145/keeping-nozzle-clean/ Mon, 29 Feb 2016 04:24:51 +0000 PunBB <![CDATA[Re: Keeping nozzle clean]]> https://www.soliforum.com/post/118281/#p118281 elmoret wrote:

That's not a common problem, you might need to deburr the nozzle. If the hole has a burr, it could cause that. You can deburr it with a deburring tool or a sharp knife.

Thanks,I did think of that and cleaned up the hole, that seemed to make things worse ,as this created  a bevel around the hole .I have fixed that now still getting the build up . Phill

]]> Mon, 29 Feb 2016 04:24:51 +0000 https://www.soliforum.com/post/118281/#p118281 <![CDATA[Re: Keeping nozzle clean]]> https://www.soliforum.com/post/118201/#p118201 That's not a common problem, you might need to deburr the nozzle. If the hole has a burr, it could cause that. You can deburr it with a deburring tool or a sharp knife.

]]> Sun, 28 Feb 2016 07:39:42 +0000 https://www.soliforum.com/post/118201/#p118201 <![CDATA[Keeping nozzle clean]]> https://www.soliforum.com/post/118189/#p118189 I am finding that after 3-4 hours, daggs built up on the nozzle which will eventually stick to the filament and jam the winder tube  .Is this a common problem, can it be avoided ?.Cheers Phill

]]> Sun, 28 Feb 2016 04:03:48 +0000 https://www.soliforum.com/post/118189/#p118189