<![CDATA[SoliForum - 3D Printing Community — Thin and weak walls]]> https://www.soliforum.com/topic/14123/thin-and-weak-walls/ Tue, 12 Apr 2016 02:04:12 +0000 PunBB <![CDATA[Re: Thin and weak walls]]> https://www.soliforum.com/post/120944/#p120944 This happens to me whenever I print something large. Its like the hotend cant keep up with how fast its printing.

Ive tried adjusting the speed in xyzware but it just clicks back to the middle position on its own.

]]> Tue, 12 Apr 2016 02:04:12 +0000 https://www.soliforum.com/post/120944/#p120944 <![CDATA[Re: Thin and weak walls]]> https://www.soliforum.com/post/118640/#p118640 I actually tried that. I even recreated the image. No luck. I think alot of the issue may have been filament, because I tried gray color and it was much better, although the vertical wall that runs across the top of the case was still a little flimsy, but there were not any holes like with the white. I just can't understand why the white worked fine with the test print and also other prints that I've done. It just did not like that phone case.

]]> Fri, 04 Mar 2016 06:36:08 +0000 https://www.soliforum.com/post/118640/#p118640 <![CDATA[Re: Thin and weak walls]]> https://www.soliforum.com/post/118552/#p118552 It may be the stl file if other files are working fine. I suggest putting it into netfabb and repairing it and trying again

]]> Thu, 03 Mar 2016 10:35:08 +0000 https://www.soliforum.com/post/118552/#p118552 <![CDATA[Re: Thin and weak walls]]> https://www.soliforum.com/post/118077/#p118077 Ok, thank you.

]]> Sat, 27 Feb 2016 02:29:43 +0000 https://www.soliforum.com/post/118077/#p118077 <![CDATA[Re: Thin and weak walls]]> https://www.soliforum.com/post/118028/#p118028 Hello Alex,
Your post is currently trapped in the Spam Quarantine.
We are experiencing some technical difficulties at the moment.  I will get you approved and move this post to the appropriate  section as soon as possible.

]]> Fri, 26 Feb 2016 17:04:20 +0000 https://www.soliforum.com/post/118028/#p118028 <![CDATA[Thin and weak walls]]> https://www.soliforum.com/post/118027/#p118027 Hi There,
I've been doing the 3D printing for about a month now. Awesome stuff. I've ran into a problem lately. I'm trying to print a phone case, but the walls are coming out thin,weak and brittle. This is on a Davinci Pro using XYZware for Pro
http://i1053.photobucket.com/albums/s47 … mnvllj.jpg
http://i1053.photobucket.com/albums/s47 … 3tqbrp.jpg
http://i1053.photobucket.com/albums/s47 … g3zbrg.jpg
When trying to pull it off the print bed, they sometimes break off. The weird thin is I had success the first couple of times I printed the case. (I'm pretty sure no setting were changed.) Now the walls are brittle and you can even put your fingernail between the walls and separate them. The wall thickness is 1.6mm. I'm using Hatchbox PLA, .3mm layer height, 200C nozzle/60C bed, and 30mm/s for speed. I seen somewhere to try multiples of .4 (Nozzle width), So I printed a test piece with 3 vertical walls with different thickness(1.2mm, 1.6mm, & 2.0mm). The test printed out fine. Even the thinnest wall at 1.2 mm was fairly sturdy and rigid, although I could still put a fingernail in that one. Why would it work on this test , but not the phone case? Any help would be appreciated.
Thank You, Alex

]]> Fri, 26 Feb 2016 16:38:04 +0000 https://www.soliforum.com/post/118027/#p118027