<![CDATA[SoliForum - 3D Printing Community — Help centering a Soli 2 Pro #witsend]]> https://www.soliforum.com/topic/13539/help-centering-a-soli-2-pro-witsend/ Thu, 28 Jan 2016 06:10:29 +0000 PunBB <![CDATA[Re: Help centering a Soli 2 Pro #witsend]]> https://www.soliforum.com/post/115205/#p115205 sometimes when loading an stl to slice you have to use RH graphics screen settings to manually move object where needed for true center print on large objects then slice and save gcode. saving stl dont always save it in position last set

]]> Thu, 28 Jan 2016 06:10:29 +0000 https://www.soliforum.com/post/115205/#p115205 <![CDATA[Re: Help centering a Soli 2 Pro #witsend]]> https://www.soliforum.com/post/115204/#p115204 need dump area on right side added 9mm. so Y 150 X 159 max. then dump area 150 left

]]> Thu, 28 Jan 2016 06:03:53 +0000 https://www.soliforum.com/post/115204/#p115204 <![CDATA[Re: Help centering a Soli 2 Pro #witsend]]> https://www.soliforum.com/post/115186/#p115186 Yep! Well...fairly the same.
Just change it and play around to get it spot on. I have modified my machines so much I forget if the mods required changing X/Y dimensions or not. But at least this gives you something to work with.

]]> Wed, 27 Jan 2016 23:02:34 +0000 https://www.soliforum.com/post/115186/#p115186 <![CDATA[Re: Help centering a Soli 2 Pro #witsend]]> https://www.soliforum.com/post/115185/#p115185 To the back/close to the power supply end of the box.
So youa re saying to change the X and Y max to be the same?
Thx so much.

]]> Wed, 27 Jan 2016 22:54:14 +0000 https://www.soliforum.com/post/115185/#p115185 <![CDATA[Re: Help centering a Soli 2 Pro #witsend]]> https://www.soliforum.com/post/115184/#p115184 Change your Y so that it matches your X and see if that helps.
Is it safe to assume that it is printing too far to the front?

]]> Wed, 27 Jan 2016 22:51:02 +0000 https://www.soliforum.com/post/115184/#p115184 <![CDATA[Re: Help centering a Soli 2 Pro #witsend]]> https://www.soliforum.com/post/115183/#p115183 Hi Azerate - Under Printer settings - Printer Shape - we have the following:
Xmin X max (set to 177)
Ymin  Y max (set to 195)
Print area width is 150.

Do we need to adjust one of those?

]]> Wed, 27 Jan 2016 22:46:52 +0000 https://www.soliforum.com/post/115183/#p115183 <![CDATA[Re: Help centering a Soli 2 Pro #witsend]]> https://www.soliforum.com/post/115182/#p115182 Open up printer settings to change it.
Under Printer Shape X and Y should read 152.5 under X/Y max and Printer Width. This should at least get you in the ballpark

EDIT: As a side note, if you have any problems and need help troubleshooting, please post here on the forum. We are 24/7 and many of us have literally removed and reinstalled every last part of our printers. We are typically more knowledgeable and eager to help smile

]]> Wed, 27 Jan 2016 22:42:06 +0000 https://www.soliforum.com/post/115182/#p115182 <![CDATA[Help centering a Soli 2 Pro #witsend]]> https://www.soliforum.com/post/115180/#p115180 Hi- can anyone assist with how to get a print centered? We have been through all the setup settings (numerous times), have deleted all profiles, reinstalled Repetier V1.6.0, running off COM3, using ABS, but it still prints about 2" off center. We've tried emailing support and tried calling them off and on for weeks now, and getting nowhere.
Any help appreciated!
TIA.

]]> Wed, 27 Jan 2016 22:26:25 +0000 https://www.soliforum.com/post/115180/#p115180