https://www.soliforum.com/topic/13275/nothing-happening/ Mon, 04 Jan 2016 00:44:20 +0000 PunBB https://www.soliforum.com/post/113188/#p113188 thank you so much, that did it---works great now

]]> Mon, 04 Jan 2016 00:44:20 +0000 https://www.soliforum.com/post/113188/#p113188 https://www.soliforum.com/post/113179/#p113179 Same thing happened to me. Mark is right. Follow the instructions to see to about "4 sheets of paper" height.

]]> Sun, 03 Jan 2016 21:56:37 +0000 https://www.soliforum.com/post/113179/#p113179 https://www.soliforum.com/post/113164/#p113164 Your z height is not set right.  The z axis is starting to low. You will need to adjust it so its about .2 mm above.

]]> Sun, 03 Jan 2016 17:21:06 +0000 https://www.soliforum.com/post/113164/#p113164 https://www.soliforum.com/post/113155/#p113155 OK, brand new-be here.
Just opened and attempted to print a sample, but it seems to be working however the nozzle just moves and scrapes the plate, no plastic.
John

]]> Sun, 03 Jan 2016 16:19:53 +0000 https://www.soliforum.com/post/113155/#p113155