SoliForum - 3D Printing Community — Help with curling edges PLA

Re: Help with curling edges PLA

null@example.com (widespreaddeadhead) — Wed, 16 Dec 2015 18:31:16 +0000

TinkerT wrote:

Oh snap i didnt realize i could just type in a number....

No worries! I had the same issue with infill percents, kept wondering how people would print infill that wasn't divisible by 5...

Re: Help with curling edges PLA

null@example.com (TinkerT) — Wed, 16 Dec 2015 17:55:08 +0000

Oh snap i didnt realize i could just type in a number....

Re: Help with curling edges PLA

null@example.com (TinkerT) — Wed, 16 Dec 2015 17:54:08 +0000

yeah i have that but my only options are 0 (soluable) or 0.2(detachable)

Re: Help with curling edges PLA

null@example.com (widespreaddeadhead) — Wed, 16 Dec 2015 16:37:35 +0000

TinkerT wrote:

Thanks for the advice! Maybe curling was the wrong term but i think you get the idea. these would have turned out worse if i didnt go in after each layer and push it down with a spatula to level it out again for the next layer.
also i tried it with support but my support fused with the bottom and i dont see any way to change how close the support is to the part in Repeteir Host.

If you're using Slic3r within RH then there is an option in the Slic3r>Print Settings>Support Material that will change that, mine is called "Contact Z Distance" and I'm running Slic3r 1.2.9

Re: Help with curling edges PLA

null@example.com (TinkerT) — Wed, 16 Dec 2015 16:24:20 +0000

Thanks for the advice! Maybe curling was the wrong term but i think you get the idea. these would have turned out worse if i didnt go in after each layer and push it down with a spatula to level it out again for the next layer.

also i tried it with support but my support fused with the bottom and i dont see any way to change how close the support is to the part in Repeteir Host.

Re: Help with curling edges PLA

null@example.com (knowack) — Wed, 16 Dec 2015 07:21:57 +0000

I print my PLA items with absolutely NO bed heating. I originally heated the bed to about 60, but experienced curling too.

Re: Help with curling edges PLA

null@example.com (Morganism) — Tue, 15 Dec 2015 18:47:59 +0000

This doesn't look like "curling" to me, in the sense of the print pulling up off the plate. It looks more like difficulty printing the overhang.

Overhangs are notoriously hard to print. Yes, the fan will help, but they still may be a problem. Try these:

1. Increase the number of outside perimeters (you have 3 maybe try 4 or 5). This will give a broader base for the next level to stick to.

2. Go slower at lower temperature (there are some scenarios where going faster actually helps instead, ie. bridging).

3. Use support material

Ultimately, at the end of the day you are trying to extruder hot, liquid plastic into thin air, and that can be hard to do.

Re: Help with curling edges PLA

null@example.com (widespreaddeadhead) — Tue, 15 Dec 2015 18:45:04 +0000

I can't view the pics at work, but I've had this problem with emmett's gears from thingiverse. Try raising the perimeters and infill if they are low.

Re: Help with curling edges PLA

null@example.com (TinkerT) — Tue, 15 Dec 2015 18:27:41 +0000

Help with curling edges PLA

null@example.com (TinkerT) — Tue, 15 Dec 2015 18:22:03 +0000

I just got my duct fan hooked up using this duct:

http://www.soliforum.com/topic/182/nozzle-fan-duct/

Hooked it up because i was having a lot of trouble with curling edges on small corners and overhangs, but it dosent seem to help that much...i set up a box fan on low about 6ft away from it and that seems to help too. Anything without an overhang comes out nice.

this is what im currently trying to print:
http://www.thingiverse.com/thing:21398

Ive oriented the balls so that a flat side is on the bottom to help. No support.
Most of my problems are happening on the first 20 layers or so, after that the print looks great.

Im wondering what i can do to make the bottom layers look better.

here are my settings.