<![CDATA[SoliForum - 3D Printing Community — da Vinci 1.0 Pro SD card error]]> https://www.soliforum.com/topic/13086/da-vinci-10-pro-sd-card-error/ Mon, 14 Dec 2015 16:00:02 +0000 PunBB <![CDATA[Re: da Vinci 1.0 Pro SD card error]]> https://www.soliforum.com/post/111592/#p111592 Good to know, I'll definitely make a copy of mine today.

]]> Mon, 14 Dec 2015 16:00:02 +0000 https://www.soliforum.com/post/111592/#p111592 <![CDATA[Re: da Vinci 1.0 Pro SD card error]]> https://www.soliforum.com/post/111553/#p111553 Here's a close up of the SD card holder.

http://www.curtronics.com/XYZPrinting/images/daVinci10ProSDcard.jpg

]]> Sun, 13 Dec 2015 23:09:15 +0000 https://www.soliforum.com/post/111553/#p111553 <![CDATA[da Vinci 1.0 Pro SD card error]]> https://www.soliforum.com/post/111542/#p111542 Was printing yesterday and got a "SD card error" on the front panel with the only option to cancel. No infamous 0040 code with it. Restarted the download to it and went to bed. This morning woke up to the infamous 0040 code and the internal light flashing on and off.

Opened 'er up and pulled the SD and made an image of it just in case. Then blew the image onto to a new Sandisk 8GB card, made the fat file system use all the space then put the files on it and loaded it up. Did a test print of one of the demo file and all is good. Not that it needs extra space but no store stocks locally the 4GB cards any more.

The SD socket has a flip latch on it that slides locking in place. So I doubt this was the old card came lose issue. If the top isn't latched it springs up so I believe the card was seated properly.

Snapped this pic of the motherboard.

http://www.curtronics.com/XYZPrinting/images/daVinci10ProMBcs.jpg

]]> Sun, 13 Dec 2015 21:51:32 +0000 https://www.soliforum.com/post/111542/#p111542