<![CDATA[SoliForum - 3D Printing Community — Printed Gear Teeth Rounded]]> https://www.soliforum.com/topic/13045/printed-gear-teeth-rounded/ Mon, 07 Dec 2015 03:55:26 +0000 PunBB <![CDATA[Re: Printed Gear Teeth Rounded]]> https://www.soliforum.com/post/111094/#p111094 Thought so, machine limitations.
Tried lowering extrusion multiplier to the point so the layers dont come apart.

Pulley - Shown 1st print PLA at .3 res.  3rd print was .2 res- about 25% better.
Belt - Shown 1st print Semi Flex at .2 res. oops forgot to widen belt model to 3/8.

When the 2 mesh, surprising, looks to be very usable on the indexer.

http://soliforum.com/i/?4bAWovj.jpg

]]> Mon, 07 Dec 2015 03:55:26 +0000 https://www.soliforum.com/post/111094/#p111094 <![CDATA[Re: Printed Gear Teeth Rounded]]> https://www.soliforum.com/post/111085/#p111085 I was never able to get my DaV to do very sharp corners or angle. It seemed to round all of them a bit.

]]> Mon, 07 Dec 2015 03:11:33 +0000 https://www.soliforum.com/post/111085/#p111085 <![CDATA[Printed Gear Teeth Rounded]]> https://www.soliforum.com/post/111082/#p111082 Can timing pulley teeth be printed w/ sharp corners ?

42 teeth XL 1/5 pulley come out w/ rounded edges. Tried .2 resolution at slow speed. W/ fan, no fan.
Cura set at .8 shell thickness. Overall the gear is perfect.
Tried measuring the shell thickness, seems to be about .9

Too rounded to use w/ a belt.

]]> Mon, 07 Dec 2015 02:21:31 +0000 https://www.soliforum.com/post/111082/#p111082