<![CDATA[SoliForum - 3D Printing Community — Upgrade to Da Vinci 1.0 Pro]]> https://www.soliforum.com/topic/12970/upgrade-to-da-vinci-10-pro/ Sat, 12 Dec 2015 14:58:39 +0000 PunBB <![CDATA[Re: Upgrade to Da Vinci 1.0 Pro]]> https://www.soliforum.com/post/111436/#p111436 You have to pay shipping if you buy the PRO, you pay for the shipping of it to you.  As far as your older printer, you do not have to pay shipping because you do not have to ship it back; you keep it.  XYZ will cancel any remaining warranty on your older printer, but that's it.

Toka wrote:

Does anyone know if I elected to upgrade to 1.0 Pro, do I have to pay shipping cost?  I tried to contact support and customer service but no response

Thx

nancyB wrote:

When I spoke with customer service, I was told  it will do many filaments, has temp adjustment, aluminum bed and better calibration... The old one will work , just not have warranty if there is any left from your original purchase.  I thnk that they are having so many complaints about calibration, the cost of their filament, that they decided to change. The goal is for this to be a user friendly household printer. It is not " high end" but it does a lot for the $$$.

]]> Sat, 12 Dec 2015 14:58:39 +0000 https://www.soliforum.com/post/111436/#p111436 <![CDATA[Re: Upgrade to Da Vinci 1.0 Pro]]> https://www.soliforum.com/post/111388/#p111388 Does anyone know if I elected to upgrade to 1.0 Pro, do I have to pay shipping cost?  I tried to contact support and customer service but no response

Thx

nancyB wrote:

When I spoke with customer service, I was told  it will do many filaments, has temp adjustment, aluminum bed and better calibration... The old one will work , just not have warranty if there is any left from your original purchase.  I thnk that they are having so many complaints about calibration, the cost of their filament, that they decided to change. The goal is for this to be a user friendly household printer. It is not " high end" but it does a lot for the $$$.

]]> Fri, 11 Dec 2015 19:08:51 +0000 https://www.soliforum.com/post/111388/#p111388 <![CDATA[Re: Upgrade to Da Vinci 1.0 Pro]]> https://www.soliforum.com/post/110781/#p110781 yes 240 max for extruder and 90 max for bed

]]> Wed, 02 Dec 2015 23:52:27 +0000 https://www.soliforum.com/post/110781/#p110781 <![CDATA[Re: Upgrade to Da Vinci 1.0 Pro]]> https://www.soliforum.com/post/110780/#p110780 no this was printed at 218* and a .2 layer

]]> Wed, 02 Dec 2015 23:51:18 +0000 https://www.soliforum.com/post/110780/#p110780 <![CDATA[Re: Upgrade to Da Vinci 1.0 Pro]]> https://www.soliforum.com/post/110715/#p110715 kev0175 wrote:

What is the max temp?

From a picture somebody posted on here, the hotend looks identical to the 1.0. So I would assume about 240*C.

]]> Wed, 02 Dec 2015 15:04:00 +0000 https://www.soliforum.com/post/110715/#p110715 <![CDATA[Re: Upgrade to Da Vinci 1.0 Pro]]> https://www.soliforum.com/post/110709/#p110709 What is the max temp?

]]> Wed, 02 Dec 2015 12:29:30 +0000 https://www.soliforum.com/post/110709/#p110709 <![CDATA[Re: Upgrade to Da Vinci 1.0 Pro]]> https://www.soliforum.com/post/110655/#p110655 thebak3 wrote:

I have it and love it, I printed this at 235 degrees and 90 on bed, at speed 45 http://soliforum.com/i/?SJu2w9h.jpg

Very nice! What layer thickness setting?

]]> Tue, 01 Dec 2015 21:00:42 +0000 https://www.soliforum.com/post/110655/#p110655 <![CDATA[Re: Upgrade to Da Vinci 1.0 Pro]]> https://www.soliforum.com/post/110586/#p110586 ive run faster but not at .2.... as for setting and control you have so much more, just lacks support material options and first layer options.

]]> Mon, 30 Nov 2015 22:37:15 +0000 https://www.soliforum.com/post/110586/#p110586 <![CDATA[Re: Upgrade to Da Vinci 1.0 Pro]]> https://www.soliforum.com/post/110584/#p110584 I have it and love it, I printed this at 235 degrees and 90 on bed, at speed 45 http://soliforum.com/i/?SJu2w9h.jpg

]]> Mon, 30 Nov 2015 22:34:21 +0000 https://www.soliforum.com/post/110584/#p110584 <![CDATA[Re: Upgrade to Da Vinci 1.0 Pro]]> https://www.soliforum.com/post/110581/#p110581 After looking at a Pro I can say the big changes are the metal bed and a Bowden extruder plus the ability to use other than XYZ filament. I was surprised to see it printing at 15mm/s on a .200 layer height though as the Bowden setup, with the extruder motor mounted on the frame, should be able to run faster than the DaVinci 1.0.

]]> Mon, 30 Nov 2015 22:08:57 +0000 https://www.soliforum.com/post/110581/#p110581 <![CDATA[Re: Upgrade to Da Vinci 1.0 Pro]]> https://www.soliforum.com/post/110559/#p110559 When I spoke with customer service, I was told  it will do many filaments, has temp adjustment, aluminum bed and better calibration... The old one will work , just not have warranty if there is any left from your original purchase.  I thnk that they are having so many complaints about calibration, the cost of their filament, that they decided to change. The goal is for this to be a user friendly household printer. It is not " high end" but it does a lot for the $$$.

]]> Mon, 30 Nov 2015 16:42:12 +0000 https://www.soliforum.com/post/110559/#p110559 <![CDATA[Upgrade to Da Vinci 1.0 Pro]]> https://www.soliforum.com/post/110554/#p110554 I am using Da Vinci Duo and received an email about trading in my old one and get the new 1.0 Pro for $499.  I have 2 questions:
1. other than the support for generic filament, did they make any other major improvements?  calibration?
2. if I traded it in, they said they won't support the old one I have.  Does anyone know if I can still use it or they will turn it off via software?

Thanks,
TOKA

]]> Mon, 30 Nov 2015 14:42:49 +0000 https://www.soliforum.com/post/110554/#p110554