<![CDATA[SoliForum - 3D Printing Community — Workbench will not connect w/ Cura]]> https://www.soliforum.com/topic/12907/workbench-will-not-connect-w-cura/ Mon, 23 Nov 2015 23:01:08 +0000 PunBB <![CDATA[Re: Workbench will not connect w/ Cura]]> https://www.soliforum.com/post/110123/#p110123 Firmware baudrate and host baudrate must match. Also confirm you have the correct comport selected.

]]> Mon, 23 Nov 2015 23:01:08 +0000 https://www.soliforum.com/post/110123/#p110123 <![CDATA[Workbench will not connect w/ Cura]]> https://www.soliforum.com/post/110114/#p110114 After hours of attempting to connect a Solidoodle Workbench to Cura in order to print, I was completely unsuccessful.  When attempting to connect, it would act as if it has not correctly connected to the software.  I tried to use MatterControl and Repertoire, but to no avail, it would still not connect.  Is there something simple that I am missing, or is this a common issue?

Thank you for your help

]]> Mon, 23 Nov 2015 22:31:14 +0000 https://www.soliforum.com/post/110114/#p110114