<![CDATA[SoliForum - 3D Printing Community — Anyone printed Laywoo-D3 on the SD?]]> https://www.soliforum.com/topic/1274/anyone-printed-laywood3-on-the-sd/ Tue, 28 Jan 2014 07:52:04 +0000 PunBB <![CDATA[Re: Anyone printed Laywoo-D3 on the SD?]]> https://www.soliforum.com/post/47956/#p47956 Photog wrote:

What about the .4 nozzle?

To avoid issues with clogs, you should really lean towards a .5 nozzle. Others will work, until they clog wink .4 will work for a while, but theres no telling when it will clog, where as with the .5 its from my experience entirely a non issue (clogs with laywoo (or laybrick) that is)

]]> Tue, 28 Jan 2014 07:52:04 +0000 https://www.soliforum.com/post/47956/#p47956 <![CDATA[Re: Anyone printed Laywoo-D3 on the SD?]]> https://www.soliforum.com/post/47955/#p47955 What about the .4 nozzle?

]]> Tue, 28 Jan 2014 07:49:02 +0000 https://www.soliforum.com/post/47955/#p47955 <![CDATA[Re: Anyone printed Laywoo-D3 on the SD?]]> https://www.soliforum.com/post/47916/#p47916 looks like ill be picking up a new nozzle too!

]]> Mon, 27 Jan 2014 23:24:14 +0000 https://www.soliforum.com/post/47916/#p47916 <![CDATA[Re: Anyone printed Laywoo-D3 on the SD?]]> https://www.soliforum.com/post/47915/#p47915 MolecularConcept wrote:

i was interested in trying this out too, i didnt hear about the cloging risk tho. if you try it keep us all posted!

Wood particles are too big for 0.35 . It's there on their website somewhere too

]]> Mon, 27 Jan 2014 23:22:36 +0000 https://www.soliforum.com/post/47915/#p47915 <![CDATA[Re: Anyone printed Laywoo-D3 on the SD?]]> https://www.soliforum.com/post/47910/#p47910 i was interested in trying this out too, i didnt hear about the cloging risk tho. if you try it keep us all posted!

]]> Mon, 27 Jan 2014 23:00:28 +0000 https://www.soliforum.com/post/47910/#p47910 <![CDATA[Re: Anyone printed Laywoo-D3 on the SD?]]> https://www.soliforum.com/post/47859/#p47859 dinosaurcam wrote:

Any update or news if this worked with .35mm hotend? with the 1.75mm Laywoo-d3

It does not. Need 0.5mm to ensure you dont get clogs.

]]> Mon, 27 Jan 2014 10:53:13 +0000 https://www.soliforum.com/post/47859/#p47859 <![CDATA[Re: Anyone printed Laywoo-D3 on the SD?]]> https://www.soliforum.com/post/47858/#p47858 Any update or news if this worked with .35mm hotend? with the 1.75mm Laywoo-d3

]]> Mon, 27 Jan 2014 10:33:18 +0000 https://www.soliforum.com/post/47858/#p47858 <![CDATA[Re: Anyone printed Laywoo-D3 on the SD?]]> https://www.soliforum.com/post/12300/#p12300 IanJohnson wrote:

You can switch the nozzles on the same hot end. Just be sure you have some 1/4" Kapton for taping the thermistor back on.

We might be trying some of this out at a point soon in the future. We'll keep you posted.

]]> Fri, 08 Feb 2013 22:41:04 +0000 https://www.soliforum.com/post/12300/#p12300 <![CDATA[Re: Anyone printed Laywoo-D3 on the SD?]]> https://www.soliforum.com/post/12257/#p12257 You can switch the nozzles on the same hot end. Just be sure you have some 1/4" Kapton for taping the thermistor back on.

]]> Fri, 08 Feb 2013 14:15:43 +0000 https://www.soliforum.com/post/12257/#p12257 <![CDATA[Re: Anyone printed Laywoo-D3 on the SD?]]> https://www.soliforum.com/post/12252/#p12252 walshy the particles of thewood maybe larger than the diameter of the nozzle for the .35 end.
the reason plastic doesn't usually notice the term right there usually? clog is that it doesn't have sold particles in it

]]> Fri, 08 Feb 2013 13:39:28 +0000 https://www.soliforum.com/post/12252/#p12252 <![CDATA[Re: Anyone printed Laywoo-D3 on the SD?]]> https://www.soliforum.com/post/12245/#p12245 It's 1.75 filament which is why I asked. Everywhere I've read online people have said that it clogs on smaller nozzles, but I can't (in my new to 3D printer world mind) figure out why this would be the case if I'm using correct size filament for the correct size nozzle. I got it from Jamie at 3dprintergear.com.au (he posts in the for sale section on here) which has it in both 1.75 and 3mm variants.

Again as a newbie, can I just order the .5mm nozzle and directly replace the existing one without any hassle (i.e. unscrew one and screw in the other)? I'm not quite so keen to replace the whole hot end (yet anyway wink.

]]> Fri, 08 Feb 2013 06:38:06 +0000 https://www.soliforum.com/post/12245/#p12245 <![CDATA[Re: Anyone printed Laywoo-D3 on the SD?]]> https://www.soliforum.com/post/12184/#p12184 walshy002000 wrote:

Hi Everyone,

When I bought my filament I also got a spool of the Laywoo-D3 filament thinking it would be something neat to print with, but I recently saw an another thread that you need a .5mm nozzle otherwise it clogs. I'm going to order a spare hot end incase I clog mine so I can keep it going, but I'm curious if anyone has printed with it with the stock .35mm SD nozzle and their experiences with it? Is it really that bad to print with?

You are definitely risking a clog if you are using anything that isn't 1.75 mm filament.

]]> Thu, 07 Feb 2013 21:53:54 +0000 https://www.soliforum.com/post/12184/#p12184 <![CDATA[Re: Anyone printed Laywoo-D3 on the SD?]]> https://www.soliforum.com/post/12155/#p12155 You can get a .5 nozzle from Makergear for about $5. They ship fast, and include chocolate.  You could also print the Mk4 extruder to make it easy to swap out the hot ends.

]]> Thu, 07 Feb 2013 16:01:02 +0000 https://www.soliforum.com/post/12155/#p12155 <![CDATA[Re: Anyone printed Laywoo-D3 on the SD?]]> https://www.soliforum.com/post/12144/#p12144 walshy, let me know how it works. I wanted to try this stuff but didn't want to risk the clog.

]]> Thu, 07 Feb 2013 14:37:25 +0000 https://www.soliforum.com/post/12144/#p12144 <![CDATA[Re: Anyone printed Laywoo-D3 on the SD?]]> https://www.soliforum.com/post/12135/#p12135 Are you using 1.75 or 3mm filament?

I was under the impression that 1.75mm wasn't widely available.

]]> Thu, 07 Feb 2013 08:26:04 +0000 https://www.soliforum.com/post/12135/#p12135