SoliForum - 3D Printing Community — Simplify3d to DaVinci1.0A. Which way if no direct connection?

Re: Simplify3d to DaVinci1.0A. Which way if no direct connection?

null@example.com (Antonious) — Sat, 03 Oct 2015 14:07:38 +0000

luc wrote:

my mistake, I checked 2.2.1 (the first one I used) not 2.1

It doesn't matter.

I will try with "wait" unchecked and "255" as serial cache size.

Re: Simplify3d to DaVinci1.0A. Which way if no direct connection?

null@example.com (luc) — Sat, 03 Oct 2015 11:53:12 +0000

my mistake, I checked 2.2.1 (the first one I used) not 2.1

Re: Simplify3d to DaVinci1.0A. Which way if no direct connection?

null@example.com (Antonious) — Sat, 03 Oct 2015 10:31:54 +0000

luc wrote:

yes I am sure
search in menu tools fw configuration
http://creatrhs.lpfrg.com/support/solut … -to-the-pc
Antonious wrote:
luc wrote:
Yes - be sure wait is unchecked and hW flow control is activated
Luc, I think that option doesn't exist in S3d 2.1, at least I don't find it.

Yes, I saw before and... no way. In my Simplify3d (2.1.0) doesn't exist the setting to activate "HW flow". I just can uncheck "Wait".

Here the window we are talking about:

Re: Simplify3d to DaVinci1.0A. Which way if no direct connection?

null@example.com (luc) — Sat, 03 Oct 2015 10:04:21 +0000

yes I am sure
search in menu tools fw configuration
http://creatrhs.lpfrg.com/support/solut … -to-the-pc

Antonious wrote:

luc wrote:
Yes - be sure wait is unchecked and hW flow control is activated
Antonious wrote:
I know Simplify3d can work with a Da Vinci with Repetier in 2.2 release and bigger, but I have the 2.1 one. Ar you sure that S3d 2.1 can connect to a Da Vinci with Repetier firm?
Luc, I think that option doesn't exist in S3d 2.1, at least I don't find it.

Re: Simplify3d to DaVinci1.0A. Which way if no direct connection?

null@example.com (Antonious) — Sat, 03 Oct 2015 09:51:58 +0000

barry1685 wrote:

I like rep host for pausing prints, moving head and fixing/cleaning and continuing print with the head going back to exact same place

Good!

Re: Simplify3d to DaVinci1.0A. Which way if no direct connection?

null@example.com (Antonious) — Sat, 03 Oct 2015 09:49:47 +0000

luc wrote:

Yes - be sure wait is unchecked and hW flow control is activated
Antonious wrote:
luc wrote:
Simplify3D can work with stock FW and repetier FW - check your settings the problem is there
I know Simplify3d can work with a Da Vinci with Repetier in 2.2 release and bigger, but I have the 2.1 one. Ar you sure that S3d 2.1 can connect to a Da Vinci with Repetier firm?

Luc, I think that option doesn't exist in S3d 2.1, at least I don't find it.

Re: Simplify3d to DaVinci1.0A. Which way if no direct connection?

null@example.com (luc) — Sat, 03 Oct 2015 01:15:31 +0000

Yes - be sure wait is unchecked and hW flow control is activated

Antonious wrote:

luc wrote:
Simplify3D can work with stock FW and repetier FW - check your settings the problem is there
I know Simplify3d can work with a Da Vinci with Repetier in 2.2 release and bigger, but I have the 2.1 one. Ar you sure that S3d 2.1 can connect to a Da Vinci with Repetier firm?

Re: Simplify3d to DaVinci1.0A. Which way if no direct connection?

null@example.com (Antonious) — Fri, 02 Oct 2015 18:57:41 +0000

hecbom wrote:

It is my understanding that If you copied the files from the sd card the printer comes with on to a wifi sd with an adapter, you can send to the "demo" file the gcode and the printer will work with no problems. An adapter sd/mico sd is needed because the newer DaVinci 1.0a now comes with a micro sd card instead of the standard sd size card. Has anyone done this?

Thank you. For the moment I haven't any problem if I have to use Repetier to pass the Simplify3d g-code to the printer although I've read that using the sd card is more reliable than the usb cable.

Re: Simplify3d to DaVinci1.0A. Which way if no direct connection?

null@example.com (Antonious) — Fri, 02 Oct 2015 18:39:15 +0000

luc wrote:

Simplify3D can work with stock FW and repetier FW - check your settings the problem is there

I know Simplify3d can work with a Da Vinci with Repetier in 2.2 release and bigger, but I have the 2.1 one. Ar you sure that S3d 2.1 can connect to a Da Vinci with Repetier firm?

Re: Simplify3d to DaVinci1.0A. Which way if no direct connection?

null@example.com (hecbom) — Fri, 02 Oct 2015 16:45:04 +0000

It is my understanding that If you copied the files from the sd card the printer comes with on to a wifi sd with an adapter, you can send to the "demo" file the gcode and the printer will work with no problems. An adapter sd/mico sd is needed because the newer DaVinci 1.0a now comes with a micro sd card instead of the standard sd size card. Has anyone done this?

Re: Simplify3d to DaVinci1.0A. Which way if no direct connection?

null@example.com (barry1685) — Fri, 02 Oct 2015 15:36:13 +0000

I like rep host for pausing prints, moving head and fixing/cleaning and continuing print with the head going back to exact same place

Re: Simplify3d to DaVinci1.0A. Which way if no direct connection?

null@example.com (luc) — Fri, 02 Oct 2015 13:36:11 +0000

or directly copy gcode to SDCard - there are several ways - but S3D can communicate with printer directly

Re: Simplify3d to DaVinci1.0A. Which way if no direct connection?

null@example.com (barry1685) — Fri, 02 Oct 2015 13:31:58 +0000

You can also export gcode from s3d and import it into repetier host

Re: Simplify3d to DaVinci1.0A. Which way if no direct connection?

null@example.com (luc) — Fri, 02 Oct 2015 13:08:43 +0000

Simplify3D can work with stock FW and repetier FW - check your settings the problem is there

Simplify3d to DaVinci1.0A. Which way if no direct connection?

null@example.com (Antonious) — Fri, 02 Oct 2015 10:47:31 +0000

Trying with a S3d 2.1, I cannot get a connection with Da Vinci 1.0A, so I suppose the way to print from S3D is to generate a file with G-code, opening it with Repetier-host and pushing the button Print in the Print Preview tab. Isn' t it? Is there another better method?

Thanks.