SoliForum - 3D Printing Community — Calibration item model for Atlas 3D scanner

Re: Calibration item model for Atlas 3D scanner

null@example.com (jeffkashinsky) — Tue, 29 Sep 2015 18:25:44 +0000

If you are a backer, it is indeed in the printables file. Scroll down. It is the 4th item from the bottom.

Re: Calibration item model for Atlas 3D scanner

null@example.com (petekitchin) — Tue, 29 Sep 2015 16:55:05 +0000

Thanks to all who replied. Unfortunately, the calibration item is not included in the printables file. Yes, I did search the forum before placing my question and I will now try the alternate calibration devices.

Re: Calibration item model for Atlas 3D scanner

null@example.com (pirvan) — Mon, 28 Sep 2015 18:59:44 +0000

Have you searched this forum before asking ?

If you had, you would have found a few posts with alternative calibration devices.

Re: Calibration item model for Atlas 3D scanner

null@example.com (Skylinc) — Mon, 28 Sep 2015 14:28:56 +0000

If you guys are KickStarter backers then you can get a link with all the downloadables in update #24 (https://www.kickstarter.com/projects/15 … ts/1189896). If not, then I would recommend you have to wait for an answer from Uriah.

Re: Calibration item model for Atlas 3D scanner

null@example.com (holoped) — Mon, 28 Sep 2015 13:32:23 +0000

I have searched for this myself, with zero success so far. Emails to the creators go unanswered.

Calibration item model for Atlas 3D scanner

null@example.com (petekitchin) — Mon, 28 Sep 2015 10:09:52 +0000

Can anyone tell me where to download the stl file for calibration item model referred to in the "Getting started" instructions that come with the scanner kit from Murobo? It is not included in the printables file.