<![CDATA[SoliForum - 3D Printing Community — 3D Scanning]]> https://www.soliforum.com/topic/1231/3d-scanning/ Wed, 20 Mar 2013 12:11:37 +0000 PunBB <![CDATA[Re: 3D Scanning]]> https://www.soliforum.com/post/17105/#p17105 Thanks for the info. I will slow down my scan. I had the Kinect mounted on a table and I turned around in a chair slowly in front of the Kinect. I may have turned too fast. I will pause after each move.

]]> Wed, 20 Mar 2013 12:11:37 +0000 https://www.soliforum.com/post/17105/#p17105 <![CDATA[Re: 3D Scanning]]> https://www.soliforum.com/post/17076/#p17076 Gordym wrote:

I hooked my Kinect to my PC last night and did a few scans with Reconstructme. I have a lot of work to do to get a good scan from it but it is easy to use.

How long did you hold it place or how quickly did you move it? The scan should improve the longer it has to view the detail. The original MS KinectFusion paper this was based on was scanning a Dell logo only 1-2mm thick so it should be fairly good given the time to average out the errors.

]]> Tue, 19 Mar 2013 22:59:39 +0000 https://www.soliforum.com/post/17076/#p17076 <![CDATA[Re: 3D Scanning]]> https://www.soliforum.com/post/16982/#p16982 nop... the niko zoom didn't work (ask me why i know it wink ) ... you need to use "reading glasses" on your kinect to improve the quality at short range

edit : see this

http://reconstructme.net/2012/03/26/rec … h-glasses/


for information the niko zoom is a wide angle lens.. you need a zoom lens... the standard is to use +2.5 dioptre reading glasses

]]> Tue, 19 Mar 2013 14:20:05 +0000 https://www.soliforum.com/post/16982/#p16982 <![CDATA[Re: 3D Scanning]]> https://www.soliforum.com/post/16979/#p16979 The gallery posts on their site look significantly better. Some indicated they were using the zoom and that seemed to help a lot. I will continue to perform some trial scanning since my printer is down and waiting on parts. I hope to increase the quality so I can print a personalized wedding cake topper for my daughter's wedding in June.

]]> Tue, 19 Mar 2013 14:11:43 +0000 https://www.soliforum.com/post/16979/#p16979 <![CDATA[Re: 3D Scanning]]> https://www.soliforum.com/post/16978/#p16978 Interesting, this kind of quality is what I would expect.
I wonder though what could be achieved by using the clip-on-zoom-lens

http://www.ign.com/articles/2011/09/10/ … ect-review

Would it be better or worse?

]]> Tue, 19 Mar 2013 14:08:16 +0000 https://www.soliforum.com/post/16978/#p16978 <![CDATA[Re: 3D Scanning]]> https://www.soliforum.com/post/16977/#p16977 I hooked my Kinect to my PC last night and did a few scans with Reconstructme. I have a lot of work to do to get a good scan from it but it is easy to use. I attached one of my first scans in an STL. It didn't pick up the detail I wanted so I will experiment more.

]]> Tue, 19 Mar 2013 13:54:11 +0000 https://www.soliforum.com/post/16977/#p16977 <![CDATA[Re: 3D Scanning]]> https://www.soliforum.com/post/16910/#p16910 Kvirre wrote:

I am really in on using the Kenect sensor as well.
And there is a good comparison-test between them and there are many waiting for the release of KinectFusion.
https://www.youtube.com/watch?v=NsBg-m2hrIM

The previously mentioned ReconstructMe uses the KinectFusion research and offers a free version for personal use. KinectFusion has also been implemented in the PCL project, although that's more just for developers.

]]> Tue, 19 Mar 2013 01:18:36 +0000 https://www.soliforum.com/post/16910/#p16910 <![CDATA[Re: 3D Scanning]]> https://www.soliforum.com/post/16808/#p16808 I am really in on using the Kenect sensor as well.
And there is a good comparison-test between them and there are many waiting for the release of KinectFusion.
https://www.youtube.com/watch?v=ZZrmPLas66E

This guy seemed to do a good work using Catch123D, and I will try that as well.
https://www.youtube.com/watch?v=NsBg-m2hrIM

]]> Mon, 18 Mar 2013 07:06:15 +0000 https://www.soliforum.com/post/16808/#p16808 <![CDATA[Re: 3D Scanning]]> https://www.soliforum.com/post/16804/#p16804 I've just ordered a Kinect sensor to expand on my Davidscan setup and was wondering what people were using with it. From this thread and others Reconstruct Me is a favourite ($300). I've recently come across Skanect ($100):

http://skanect.manctl.com/

Any others?

]]> Mon, 18 Mar 2013 04:55:13 +0000 https://www.soliforum.com/post/16804/#p16804 <![CDATA[Re: 3D Scanning]]> https://www.soliforum.com/post/14597/#p14597 I used a projector and david laser scanner.

http://www.kvistholm.se/Motorized-3D-Scanning

]]> Fri, 01 Mar 2013 08:41:27 +0000 https://www.soliforum.com/post/14597/#p14597 <![CDATA[Re: 3D Scanning]]> https://www.soliforum.com/post/14529/#p14529 cmetzel wrote:

http://www.3ders.org/articles/20130225- … anner.html

If anyone sees this being released please update this thread!

]]> Thu, 28 Feb 2013 22:41:48 +0000 https://www.soliforum.com/post/14529/#p14529 <![CDATA[Re: 3D Scanning]]> https://www.soliforum.com/post/14307/#p14307 http://www.3ders.org/articles/20130225- … anner.html

]]> Wed, 27 Feb 2013 15:08:20 +0000 https://www.soliforum.com/post/14307/#p14307 <![CDATA[Re: 3D Scanning]]> https://www.soliforum.com/post/14303/#p14303 I've been playing with designing a scanner like the FabScan (http://hci.rwth-aachen.de/fabscan) with a line laser, a webcam, and a turntable (total cost of materials <100$). All the mechanical supports are printed with the SD2... It works quite nicely with a very nice resolution for objects that are in the range 2-20cm. Now I added a second laser to get better acquisition of some features, so I have to rethink my setup and rewrite the software. When I have something good to show, I'll post some results and share the wealth smile In the meantime, I leave you with a teaser:
http://img542.imageshack.us/img542/92/interface1.jpg

http://img521.imageshack.us/img521/258/meshlab.jpg

http://img12.imageshack.us/img12/1382/p1010012oo.jpg

]]> Wed, 27 Feb 2013 14:55:05 +0000 https://www.soliforum.com/post/14303/#p14303 <![CDATA[Re: 3D Scanning]]> https://www.soliforum.com/post/12453/#p12453 I've seen a couple nice setups involving a Kinect or a Playstation 3 camera. I'll probably attempt one of these at some point myself. With the other options being software based I see no reason not to try those as well.

]]> Mon, 11 Feb 2013 00:29:01 +0000 https://www.soliforum.com/post/12453/#p12453 <![CDATA[Re: 3D Scanning]]> https://www.soliforum.com/post/12388/#p12388 I have recorded several short videos. One stuffed up and I have to do it again but after that I'll slap them together and upload.

]]> Sun, 10 Feb 2013 08:36:05 +0000 https://www.soliforum.com/post/12388/#p12388