<![CDATA[SoliForum - 3D Printing Community — The printer is working, but the model is not printed.]]> https://www.soliforum.com/topic/12126/the-printer-is-working-but-the-model-is-not-printed/ Mon, 24 Aug 2015 09:43:29 +0000 PunBB <![CDATA[Re: The printer is working, but the model is not printed.]]> https://www.soliforum.com/post/104103/#p104103 Thanks! Twice I "load filament" through the printer menu - and helped!

]]> Mon, 24 Aug 2015 09:43:29 +0000 https://www.soliforum.com/post/104103/#p104103 <![CDATA[Re: The printer is working, but the model is not printed.]]> https://www.soliforum.com/post/104058/#p104058 Hello!

Did I understand correctly that:

- when the filament is loaded, a little bit comes flowing out of the nozzle?
- the extruder is hot and moves around the service?

If this is true, you might wanna check your cartridge. Sometimes the filament is jammed inside the cartridge. The printer won't get any filament then, but thinks he is getting it.

Just pull some filament out of the cartridge and print another model, keep checking the cartridge and the filament that it goes into the printer and is passing true!

Good luck!

]]> Sun, 23 Aug 2015 12:00:05 +0000 https://www.soliforum.com/post/104058/#p104058 <![CDATA[The printer is working, but the model is not printed.]]> https://www.soliforum.com/post/104057/#p104057 Hello! Please help. New printer XYZ Da Vinci after printing 4 models no longer print. Prints "emptiness." I unload and load filament the menu. All right. The extruder outlet trim the thread.

]]> Sun, 23 Aug 2015 11:42:41 +0000 https://www.soliforum.com/post/104057/#p104057