<![CDATA[SoliForum - 3D Printing Community — Davinci duo 2.0 think extruder 1 not heating]]> https://www.soliforum.com/topic/12122/davinci-duo-20-think-extruder-1-not-heating/ Thu, 24 Sep 2015 14:39:55 +0000 PunBB <![CDATA[Re: Davinci duo 2.0 think extruder 1 not heating]]> https://www.soliforum.com/post/106145/#p106145 I got a brand new extruder duo replacement for around £100 and still had the problem. So company helping me with this said sounds like you need new heating element that was like £10 off XYZ. got it today and find got 2 new 1s on the new extruder package and no instructions for how to fit it.
Does anyone know what I need to do or iv wasted over £600 including my attempts to get replacement parts working getting scrapped...

]]> Thu, 24 Sep 2015 14:39:55 +0000 https://www.soliforum.com/post/106145/#p106145 <![CDATA[Re: Davinci duo 2.0 think extruder 1 not heating]]> https://www.soliforum.com/post/104063/#p104063 Extruder 1 still won't heat up. I can't find a solution. I don't need to replace the module as extruder 2 heats up fine. Was thinking get a similar replacement with the 2 wires attached like the original?

]]> Sun, 23 Aug 2015 15:53:57 +0000 https://www.soliforum.com/post/104063/#p104063 <![CDATA[Davinci duo 2.0 think extruder 1 not heating]]> https://www.soliforum.com/post/104027/#p104027 My extruder 1 worked for 2 days and then stopped heating. I have seen on another topic possible causes. I tested the temp gauge with a heat gun and it worked. 3 red leds on motherboard for the resistor fuses. So must be 5he heat cartridge.

Does anyone know where I can get these from and how to replace them? I am new to 3d printing g btw so detailed set of instructions would be awesome.

Many thanks in advance!

]]> Sat, 22 Aug 2015 14:14:17 +0000 https://www.soliforum.com/post/104027/#p104027