SoliForum - 3D Printing Community — Using Newer Repetier 1.5.4 ?

Re: Using Newer Repetier 1.5.4 ?

null@example.com (FrozenRC) — Mon, 24 Aug 2015 03:21:10 +0000

Running fine here.

Re: Using Newer Repetier 1.5.4 ?

null@example.com (knucklbustr) — Mon, 24 Aug 2015 01:49:08 +0000

As the ole adage goes, If it aint broke dont fix it. Everythings dialed in, so Ill stick w/ previous version.

But, yea, supports suck. Ill use B9 Creator, if not satisfied then, Ill place them manually. Havent tried Craftware.

Re: Using Newer Repetier 1.5.4 ?

null@example.com (darcwarrior) — Fri, 21 Aug 2015 04:26:09 +0000

Did any of you guys notice a improvement in the slicing with support structures, especially the grid type? I was thinking of upgrading if possible.

Re: Using Newer Repetier 1.5.4 ?

null@example.com (mark.burton) — Fri, 21 Aug 2015 00:47:32 +0000

I have been using it just fine as well.

Re: Using Newer Repetier 1.5.4 ?

null@example.com (batmaster) — Wed, 19 Aug 2015 17:17:27 +0000

i use 1.5.4 works fine.

Re: Using Newer Repetier 1.5.4 ?

null@example.com (carl_m1968) — Wed, 19 Aug 2015 01:13:30 +0000

knucklbustr wrote:

Still using 1.06 w/ CuraEngine slicer. Get near perfect prints, though I run it slow, 25mm/s.
I see 1.5.4 is using a newer CuraEngine.
Anyone changed to the newer update ? Any noticeable improvements ?

I think most Da Vinci users are moving to Simplify3d simply because the reults are worth the price and it supports the Da Vincis directly.

Using Newer Repetier 1.5.4 ?

null@example.com (knucklbustr) — Wed, 19 Aug 2015 01:01:05 +0000

Still using 1.06 w/ CuraEngine slicer. Get near perfect prints, though I run it slow, 25mm/s.

I see 1.5.4 is using a newer CuraEngine.

Anyone changed to the newer update ? Any noticeable improvements ?