SoliForum - 3D Printing Community — Davinci the instrument?

Re: Davinci the instrument?

null@example.com (Ang_Prints) — Mon, 10 Aug 2015 16:26:30 +0000

Yes, that is perfect for the buzzer portion!
Do you know of anything that does it with the Steppers?

Re: Davinci the instrument?

null@example.com (luc) — Mon, 10 Aug 2015 15:14:04 +0000

you mean playing music using M300 command ?

like:
;Indiana
M300 S1318 P240
M300 S0 P120
M300 S1396 P120
M300 S1567 P120
M300 S0 P120
M300 S2093 P960
M300 S0 P120
M300 S1174 P240
M300 S0 P120
M300 S1318 P120
M300 S1396 P960
M300 S0 P240
M300 S1567 P240
M300 S0 P120
M300 S880 P120
M300 S987 P120
M300 S0 P120
M300 S2793 P960
M300 S0 P240
M300 S880 P240
M300 S0 P120
M300 S987 P120
M300 S2093 P480
M300 S2349 P480
M300 S2637 P480

converter:
http://ddrboxman.github.io/RepRapRingtone/

several songs:
http://www.picaxe.com/RTTTL-Ringtones-for-Tune-Command/

Re: Davinci the instrument?

null@example.com (Ang_Prints) — Mon, 10 Aug 2015 02:02:10 +0000

Hi Tin,
I think there are multiple parts of your response that deserve a response.
Someone would perhaps want to play music on a 3D printer because it would be a fun project, why do people play music on Tesla coils? which I'm almost certain that's the reason that most people who are here are here. I am completely aware I can do this with a stepper motor, but I want to do this with a Gcode that other people can load and have fun themselves! I was just curious on where to start, if you actually do a LITTLE more research you can find that a surprisingly large amount of people do it or have so it's not a CRAZY response. I guess I'm just looking for a way to make 3D Printing a little more exciting, innovative and fun for everyone. I don't mean to come across as rude, although I feel as I'm writing this it will.

Thanks,
Ang_Prints

Re: Davinci the instrument?

null@example.com (Tin Falcon) — Mon, 10 Aug 2015 01:27:04 +0000

Not sure why one would want to use a 3d printer to play music they are for 3d printing. That said if you realy want play music on stepper motors .motors and arduino are cheap enough and a google search of steper motor music will produce many links of it being done and how to.
http://makezine.com/2009/06/23/stepper-motor-music/
Tin

Davinci the instrument?

null@example.com (Ang_Prints) — Mon, 10 Aug 2015 00:53:29 +0000

Hi all, first let me say if you haven't seen my introduction post check it out! http://www.soliforum.com/topic/12012/hello-from-ohio/
Secondly, I was wondering if it's possible to do either of the following or if it has been done by someone.
Either (A) Play music through the onboard buzzer
Or (B) Play music with the stepper motors

I understand, that B is most likely very feasible but how would one have to go about doing it? After thinking about it for a while I came to the conclusion that the only way for me to do it was manually enter speeds and co-ordinates in GCODE. But of course, if I KNEW what I was doing I wouldn't be asking for suggestions and help and I would just post my findings.

Thanks,
Ang_Prints