<![CDATA[SoliForum - 3D Printing Community — E3D J head hot end]]> https://www.soliforum.com/topic/11918/e3d-j-head-hot-end/ Wed, 19 Aug 2015 11:29:46 +0000 PunBB <![CDATA[Re: E3D J head hot end]]> https://www.soliforum.com/post/103838/#p103838 Thanks Azerate.

]]> Wed, 19 Aug 2015 11:29:46 +0000 https://www.soliforum.com/post/103838/#p103838 <![CDATA[Re: E3D J head hot end]]> https://www.soliforum.com/post/103620/#p103620 You want to go with the MK6 that wardr revised. If you search Solidoodle E3D v6 in Thingiverse, you will find multiple designs.
The profiles are identical between the Lite6 and the v6

]]> Sat, 15 Aug 2015 14:31:19 +0000 https://www.soliforum.com/post/103620/#p103620 <![CDATA[Re: E3D J head hot end]]> https://www.soliforum.com/post/103618/#p103618 Will the MK5 work with v6?  I didnt go with a lite...I just bought the full V6.

]]> Sat, 15 Aug 2015 14:04:33 +0000 https://www.soliforum.com/post/103618/#p103618 <![CDATA[Re: E3D J head hot end]]> https://www.soliforum.com/post/103604/#p103604 An extended Z tab would help. Especially if you ever choose to add on a Volcano.
Also, stock up on 3mm screws and nuts. I made far too many runs to Home Depot when I first upgraded to the Lawsy carriages.

The Z tab I meantioned shouldn't be mandatory for the v6. If needed, you *could* just flip the screw. But only crazy people do that big_smile

]]> Sat, 15 Aug 2015 02:11:59 +0000 https://www.soliforum.com/post/103604/#p103604 <![CDATA[Re: E3D J head hot end]]> https://www.soliforum.com/post/103593/#p103593 MK5 if you need one.

]]> Fri, 14 Aug 2015 23:45:39 +0000 https://www.soliforum.com/post/103593/#p103593 <![CDATA[Re: E3D J head hot end]]> https://www.soliforum.com/post/103576/#p103576 Got my V6 in today.  Got the LM88Us in last week.  I printed lawsy's x and y carriage replacements, what else to I need to print before I rip this thing down?

]]> Fri, 14 Aug 2015 20:35:30 +0000 https://www.soliforum.com/post/103576/#p103576 <![CDATA[Re: E3D J head hot end]]> https://www.soliforum.com/post/102595/#p102595 I hadnt noticed the SD card slot on the board before...interesting

]]> Fri, 31 Jul 2015 18:26:24 +0000 https://www.soliforum.com/post/102595/#p102595 <![CDATA[Re: E3D J head hot end]]> https://www.soliforum.com/post/102594/#p102594 You'll want to read through the WIKI Sections some is out of date yet still applicable.
http://www.soliwiki.com/Updating_Solidoodle_Firmware Pay close attention to the Printerboard section.  The firmware is in there but just in case https://github.com/ozadr1an/Solidoodle- … in_v1_beta
Reading through the e3d section will at least help you to understand most of what is involved. http://www.soliwiki.com/E3D_extruder
You'll want to follow the complete V6 hot end assembly instructions  http://wiki.e3d-online.com/wiki/Main_Page
Hope that helps

]]> Fri, 31 Jul 2015 18:20:34 +0000 https://www.soliforum.com/post/102594/#p102594 <![CDATA[Re: E3D J head hot end]]> https://www.soliforum.com/post/102591/#p102591 That's a printrboard.

Also, lol to "risk of electric shock". The highest voltage on that board is 12 volts.

]]> Fri, 31 Jul 2015 17:55:12 +0000 https://www.soliforum.com/post/102591/#p102591 <![CDATA[Re: E3D J head hot end]]> https://www.soliforum.com/post/102586/#p102586 http://soliforum.com/i/?oeW3k1e.jpg

Here is my board

]]> Fri, 31 Jul 2015 17:01:25 +0000 https://www.soliforum.com/post/102586/#p102586 <![CDATA[Re: E3D J head hot end]]> https://www.soliforum.com/post/102585/#p102585 Cool.  Give me a minute...

]]> Fri, 31 Jul 2015 16:56:00 +0000 https://www.soliforum.com/post/102585/#p102585 <![CDATA[Re: E3D J head hot end]]> https://www.soliforum.com/post/102579/#p102579 It should be printed right on there or you can post a picture and we will tell you.
The steppers are removable on the Sanguinololu and are not on the PrinterBoard.  This will tell me what links to provide to get you the right set of instructions.

]]> Fri, 31 Jul 2015 16:15:06 +0000 https://www.soliforum.com/post/102579/#p102579 <![CDATA[Re: E3D J head hot end]]> https://www.soliforum.com/post/102577/#p102577 Where would I find that on the board?

]]> Fri, 31 Jul 2015 16:09:53 +0000 https://www.soliforum.com/post/102577/#p102577 <![CDATA[Re: E3D J head hot end]]> https://www.soliforum.com/post/102487/#p102487 You will be absolutely amazed at the difference.  Consider buying a HobbedGoblin while ordering from filastruder.  With the E3d Miore will be more pronounced and a smaller drive gear will help reduce that.  Then read up on the required firmware change in the WIKI.  If you have questions just ask and I'll be happy to walk you through it.
What control board is on your SD3? That's the first question to be answered.

]]> Thu, 30 Jul 2015 23:54:55 +0000 https://www.soliforum.com/post/102487/#p102487 <![CDATA[Re: E3D J head hot end]]> https://www.soliforum.com/post/102479/#p102479 I have a solidoodle 3..currently unmolested, but I am looking to do the bearing upgrade this weekend and the hotend/fan upgrade next week.

]]> Thu, 30 Jul 2015 22:22:06 +0000 https://www.soliforum.com/post/102479/#p102479