you need to edit your process settings to adjust your temp there.

As I said, Editing the process settings does Not change the Temp at printer

Note: that only happens with Simplify3D software

When I change Temp setting of extruder it Always set Temp to 230C, at printer.
I tried lowering it several times, at different temps, but always went back to 230

It's definitely saving the changes in process settings
but not getting to printer, when print is started ???

Anyone know Why ???

Note: it looks like it is using the correct G-code (script) command
for Extruder-temp (M104 S190 T0), which should be 190C, not 230

If it was a stand alone, fully downloadable program, it would be different - looks like it has some features that I would like - but when you live in the boonies like we do, you don't have access to cable internet. We have the best option available to us out here, but it isn't good enough for running cloud based stuff like that. even a minor glitch (which happens often) in the service could cause some big problems..

I will stick with my stand alone programs - even if they are free. 123D Design works quite well for 99.9% of my needs. Blender is another I have, as well as Sculptris (fun to play with, haven't tried printing anything out of it yet tho). I also have Sketchup, but don't really care for it.

The only "paid" program I have is AC3D, and it was less than $100 - it allows me to modify any existing stl file, as well as create new models - but a bit more complicated to use.

The thing these programs all have in common is a "merge" function to make multiple parts into one part. So, yeah - i guess software choice does make a difference.

just overlapping parts does not make them "one part". The OP would still have the same issue - the slicer would still "see" 2 separate parts and slice accordingly.

Properly merging the parts will make them into one part that the slicer will slice as one part.

Not properly merging parts is frequently the cause of models not being manifold as well.

You actually need one of the parts to be slightly inside the other.

Actually, the parts need to be merged into one piece - not just set next to each other, or even slightly overlapping each other.
Merging makes multiple parts into one part.

Sorry I gave the express version....

You actually need one of the parts to be slightly inside the other.

Actually, the parts need to be merged into one piece - not just set next to each other, or even slightly overlapping each other.
Merging makes multiple parts into one part.

When you make designs, you cant take part A and part B and just put them next to each other and call that a solid piece. You actually need one of the parts to be slightly inside the other.

The better slicers such as the one in Simplify3d will see the two parts as individual parts and not merged.

What exactly are you asking?

the arm is not continuous with the base pieces ...
I wish I had the arm in one piece like that of the base as repetier

this : http://www.thingiverse.com/thing:529837

not with arms basic parts simplify3d ???

repetier in one parts :

bug or setup ?

thank you for helping