<![CDATA[SoliForum - 3D Printing Community — Sealing at Heatblock fell off]]> https://www.soliforum.com/topic/11853/sealing-at-heatblock-fell-off/ Fri, 24 Jul 2015 18:47:24 +0000 PunBB <![CDATA[Re: Sealing at Heatblock fell off]]> https://www.soliforum.com/post/101954/#p101954 watch the temperatures closely. if it is oscillating and not maintaining temperature, you need to run a PID autotune.

http://reprap.org/wiki/PID_Tuning

]]> Fri, 24 Jul 2015 18:47:24 +0000 https://www.soliforum.com/post/101954/#p101954 <![CDATA[Re: Sealing at Heatblock fell off]]> https://www.soliforum.com/post/101929/#p101929 Ah fire cement. Ok thanks for the info smile

]]> Fri, 24 Jul 2015 13:27:40 +0000 https://www.soliforum.com/post/101929/#p101929 <![CDATA[Re: Sealing at Heatblock fell off]]> https://www.soliforum.com/post/101927/#p101927 Should be fine, that's just fire cement.  So if you really wanted to fix it, a trip to Home Depot is all you'd need.

]]> Fri, 24 Jul 2015 13:10:23 +0000 https://www.soliforum.com/post/101927/#p101927 <![CDATA[Sealing at Heatblock fell off]]> https://www.soliforum.com/post/101925/#p101925 Hello guys,

my loved Solidoodle 4 clogged for the first time a few days earlier. So i took it apart and cleaned the nozzle. But while i was reassembling the nozzle  the "sealing" (i don't know how this is exactly called) between the heat block and the cables just fell apart...

But i don't know if i have to replace this or if i'm able to print without this sealing. You can see it in the picture below.
I tried to search for this but i got no results.


It would be great if you could say if it's safe to print smile

]]> Fri, 24 Jul 2015 12:36:19 +0000 https://www.soliforum.com/post/101925/#p101925