<![CDATA[SoliForum - 3D Printing Community — (solved) problem me printer]]> https://www.soliforum.com/topic/11770/solved-problem-me-printer/ Tue, 14 Jul 2015 19:03:03 +0000 PunBB <![CDATA[Re: (solved) problem me printer]]> https://www.soliforum.com/post/101121/#p101121 carl_m1968 wrote:

Do yourself a favor and start over. Forget the video and follow this thread word for word.

http://voltivo.com/forum/davinci-firmwa … and-issues

i love you THX smile


#define X_MAX_LENGTH 239
#define Y_MAX_LENGTH 217
#define Z_MAX_LENGTH 200
#define X_MIN_POS -34
#define Y_MIN_POS -10
#define Z_MIN_POS 0

]]> Tue, 14 Jul 2015 19:03:03 +0000 https://www.soliforum.com/post/101121/#p101121 <![CDATA[Re: (solved) problem me printer]]> https://www.soliforum.com/post/101118/#p101118 Do yourself a favor and start over. Forget the video and follow this thread word for word.

http://voltivo.com/forum/davinci-firmwa … and-issues

]]> Tue, 14 Jul 2015 18:38:36 +0000 https://www.soliforum.com/post/101118/#p101118 <![CDATA[Re: (solved) problem me printer]]> https://www.soliforum.com/post/101117/#p101117 my EPPROM config


I need EPPROM a DaVinci 1.0 set everything up for the values!

]]> Tue, 14 Jul 2015 18:32:47 +0000 https://www.soliforum.com/post/101117/#p101117 <![CDATA[Re: (solved) problem me printer]]> https://www.soliforum.com/post/101112/#p101112 I change values

SETTING/POSITON

X 0.00
Y 0.00
Z 0.00

autolevel OFF

Xmin 0.00
Ymin 0.00
Zmin 0.00


it must be the Causse really believe!


how to put the parameter deffault?

]]> Tue, 14 Jul 2015 18:06:39 +0000 https://www.soliforum.com/post/101112/#p101112 <![CDATA[Re: (solved) problem me printer]]> https://www.soliforum.com/post/101109/#p101109 carl_m1968 wrote:

What process did you follow to install Repetier?


I have followed this
https://youtu.be/rjuCvlnpB7M
until now I had no problem? This came all alone?
I had the cable plug into the PC, and at the same time I start the file from the SD card may be the problem?

]]> Tue, 14 Jul 2015 17:51:48 +0000 https://www.soliforum.com/post/101109/#p101109 <![CDATA[Re: (solved) problem me printer]]> https://www.soliforum.com/post/101104/#p101104 What process did you follow to install Repetier?

]]> Tue, 14 Jul 2015 17:30:06 +0000 https://www.soliforum.com/post/101104/#p101104 <![CDATA[(solved) problem me printer]]> https://www.soliforum.com/post/101103/#p101103 hello

when launching the project from pc or sd card I have this:

https://youtu.be/EOtSp1bE68U

many filament coming out very fast? and nothing else ????


thx help

]]> Tue, 14 Jul 2015 17:25:21 +0000 https://www.soliforum.com/post/101103/#p101103