<![CDATA[SoliForum - 3D Printing Community — The problem with the calibration]]> https://www.soliforum.com/topic/11756/the-problem-with-the-calibration/ Tue, 04 Aug 2015 06:40:22 +0000 PunBB <![CDATA[Re: The problem with the calibration]]> https://www.soliforum.com/post/102855/#p102855 rtr989 wrote:
hairu526 wrote:

Luxor, are you using an ATLAS 3D kit?  If so, you should not need to modify the location settings.  If the model is too short, then your camera Y value is likely incorrect or the camera is misaligned.  If your model is too wide or too skinny, then the laser X values are incorrect or the lasers are misaligned.

did you read the PM?


I did not get PM.

]]> Tue, 04 Aug 2015 06:40:22 +0000 https://www.soliforum.com/post/102855/#p102855 <![CDATA[Re: The problem with the calibration]]> https://www.soliforum.com/post/102853/#p102853 hairu526 wrote:

Luxor, are you using an ATLAS 3D kit?  If so, you should not need to modify the location settings.  If the model is too short, then your camera Y value is likely incorrect or the camera is misaligned.  If your model is too wide or too skinny, then the laser X values are incorrect or the lasers are misaligned.

did you read the PM?

]]> Tue, 04 Aug 2015 06:14:12 +0000 https://www.soliforum.com/post/102853/#p102853 <![CDATA[Re: The problem with the calibration]]> https://www.soliforum.com/post/102423/#p102423 Thank You Pirvan!

]]> Thu, 30 Jul 2015 08:15:43 +0000 https://www.soliforum.com/post/102423/#p102423 <![CDATA[Re: The problem with the calibration]]> https://www.soliforum.com/post/102373/#p102373 You can make your own calibration tool, and all you'll need is a inkjet printer, and a CD jewel case.  Take a look at the link below.

http://www.soliforum.com/post/97554/#p97554

http://www.soliforum.com/misc.php?action=pun_attachment&amp;item=8755

The checkerboard pattern is 1/2" squares, but you can also make it 1/4" squares for finer calibration.  After I printed it, I glued the paper to the face of the CD case.  When you partially open the case, it stands up on its own.  I like it better than the original calibration thingy.

]]> Wed, 29 Jul 2015 19:40:05 +0000 https://www.soliforum.com/post/102373/#p102373 <![CDATA[Re: The problem with the calibration]]> https://www.soliforum.com/post/102339/#p102339 I try to calibrate self-made hardware but it's extremely hard to do, i think i need calibration item:
http://soliforum.com/i/?TSnilBH.png
There i can download the calibration item .stl file for printing? Or at least sizes of this item to make by myself?

]]> Wed, 29 Jul 2015 07:47:00 +0000 https://www.soliforum.com/post/102339/#p102339 <![CDATA[Re: The problem with the calibration]]> https://www.soliforum.com/post/101469/#p101469 Luxor, are you using an ATLAS 3D kit?  If so, you should not need to modify the location settings.  If the model is too short, then your camera Y value is likely incorrect or the camera is misaligned.  If your model is too wide or too skinny, then the laser X values are incorrect or the lasers are misaligned.

]]> Sat, 18 Jul 2015 15:15:06 +0000 https://www.soliforum.com/post/101469/#p101469 <![CDATA[The problem with the calibration]]> https://www.soliforum.com/post/101005/#p101005 Please help calibrate the scanner.

distance and location of the attachment.

http://www.soliforum.com/misc.php?action=pun_attachment&amp;item=8902

tried all possible settings, it scans only the standard settings but not scan correctly. Model is too small.


What settings need to enter in what fields?

]]> Mon, 13 Jul 2015 10:57:20 +0000 https://www.soliforum.com/post/101005/#p101005