SoliForum - 3D Printing Community — davinci 1.0 rod shaft bend :(

Re: davinci 1.0 rod shaft bend :(

null@example.com (efes) — Thu, 09 Jul 2015 12:59:50 +0000

cool warranty 12 monts shaft... service xyz-printing-davinci send 2 shaft warranty

Re: davinci 1.0 rod shaft bend :(

null@example.com (efes) — Tue, 07 Jul 2015 20:35:38 +0000

please help
http://www.soliforum.com/topic/11698/bu … avinci-10/

Re: davinci 1.0 rod shaft bend :(

null@example.com (carl_m1968) — Fri, 03 Jul 2015 00:11:48 +0000

efes wrote:

you think it is not a problem for me?

Actually I misread your picture. The rods you have marked if bent will need to be replaced. I though the one at the top for the belts where marked, but they are not.

Re: davinci 1.0 rod shaft bend :(

null@example.com (efes) — Thu, 02 Jul 2015 23:57:53 +0000

you think it is not a problem for me?

Re: davinci 1.0 rod shaft bend :(

null@example.com (carl_m1968) — Thu, 02 Jul 2015 23:42:01 +0000

TheBaron wrote:

If you measure the diameter of the rods, there are many suppliers. I am in the us and get mine from McMaster-Carr www.mcmaster.Com . Another popular company is misume. If you can find a supplier of precision rod in your country, it may be cheaper than shipping from the us.

The problem with the Da Vinci, not sure if you have one but the Y rods have double grooves cut in each end for snap rings to mount on the inside and outside of the frame. Those are a major pin to cut accurately on hardened rod without a small machine shop.

To Efes, I don't think the upper crossbars will have that great of an impact on you as they simply keep the drive belts on either side sychronized. They do not directly impact the alignment of the head like the X and Y rods would.

Re: davinci 1.0 rod shaft bend :(

null@example.com (TheBaron) — Thu, 02 Jul 2015 23:22:13 +0000

If you measure the diameter of the rods, there are many suppliers. I am in the us and get mine from McMaster-Carr www.mcmaster.Com . Another popular company is misume. If you can find a supplier of precision rod in your country, it may be cheaper than shipping from the us.

Re: davinci 1.0 rod shaft bend :(

null@example.com (efes) — Thu, 02 Jul 2015 23:07:10 +0000

thx I wrote...

Re: davinci 1.0 rod shaft bend :(

null@example.com (carl_m1968) — Thu, 02 Jul 2015 22:53:13 +0000

See this post..

http://www.soliforum.com/post/100360/#p100360

He is parting out a Da Vinci so make him an offer on the rods and shipping.

davinci 1.0 rod shaft bend :(

null@example.com (efes) — Thu, 02 Jul 2015 22:46:04 +0000

I bought a used printer,
I now understand why I buy cheap!
I had much difficulty in calibrating my printer!
I buy this: http://www.banggood.com/0_01mm-Accuracy … 48936.html print this http://www.thingiverse.com/thing:718768 and I realized now my problem!

please look : https://youtu.be/niw1ZFHhfv4

I have the same problem with the left, but can very

please help !

it is possible to repair the problem or should I change?
if I should change or even find parts?

thank you for your help