<![CDATA[SoliForum - 3D Printing Community — please help]]> https://www.soliforum.com/topic/11579/please-help/ Tue, 23 Jun 2015 06:39:43 +0000 PunBB <![CDATA[please help]]> https://www.soliforum.com/post/99713/#p99713 hi all
This is from Noandishan-nokhbe mehvar-fars co, We have a Zprinter model 450 manufactured by Zcorp and we hope that you can help us with a problem regarding this device.
At the moment, the device cannot connect to the computer via network cable and the computer data are not transmitted to the device. The device is alarming the error" unknown printer". It should be noted that after being turned on, the device alarms three times (beeps) and does not boot up. If it is booted by F2, the connection with the device fails due to the cited error "unknown printer".
We will be really grateful to have your response.
Thanks and regards.
Mehdi Amiri
CEO of Noandishan-nokhbe mehvar-fars

Considering that the problem was created when the battery was weak motherboard
Therefore, I ask to all those who are our model system BIOS settings Send me demonstrate by comparing the initial configuration settings back .
thanks

]]> Tue, 23 Jun 2015 06:39:43 +0000 https://www.soliforum.com/post/99713/#p99713