<![CDATA[SoliForum - 3D Printing Community — davinci 1.0 warm cabin ?]]> https://www.soliforum.com/topic/11567/davinci-10-warm-cabin/ Tue, 23 Jun 2015 00:15:50 +0000 PunBB <![CDATA[Re: davinci 1.0 warm cabin ?]]> https://www.soliforum.com/post/99678/#p99678 efes,

The problem you have could be due to a slow computer.  If your computer is running other things while your printing, it could cause the software to slow down too, which then makes the printer skip and mess up.
I would suggest, before you start a print, to restart your whole computer and not open anything up except for Simplify3D, and see if that makes a difference.

Hope this helps,
Dom

]]> Tue, 23 Jun 2015 00:15:50 +0000 https://www.soliforum.com/post/99678/#p99678 <![CDATA[Re: davinci 1.0 warm cabin ?]]> https://www.soliforum.com/post/99640/#p99640 for good ....
I printed a 20cm long cylinder with ONLY 3 small mini stop not too serious!
I believe that my first file was not good!
http://soliforum.com/i/?ff7GOX8.jpg

]]> Mon, 22 Jun 2015 20:48:01 +0000 https://www.soliforum.com/post/99640/#p99640 <![CDATA[davinci 1.0 warm cabin ?]]> https://www.soliforum.com/post/99625/#p99625 hello,

I believe that because of the heat in the cabin engines do not!
when it's too hot it does not work very well for doing his continuous stops quickly?
people who use a fan to clear heat from the cabin? if so how?
thank you

sorry english not good ! use translate hmm

add setup simplify3d please look normal config or not normal ?

during this test door open with open top too!

probleme video : https://youtu.be/BbS5hlbCKr0


[video]





cube test no problem ?

https://youtu.be/X4uwg7xZpx8
speed 220 !


I understand anything ?

]]> Mon, 22 Jun 2015 17:41:29 +0000 https://www.soliforum.com/post/99625/#p99625