SoliForum - 3D Printing Community — what Double back tape for 3" car medallion

Re: what Double back tape for 3" car medallion

null@example.com (dubbsd) — Sun, 21 Jun 2015 20:12:20 +0000

Thanks Fred
I happen to have a roll of the 15 LB 3M outdoor tape.
I just was not sure if it would hold up on a vehicle.

Re: what Double back tape for 3" car medallion

null@example.com (fred_dot_u) — Sun, 21 Jun 2015 17:55:29 +0000

I'll give a thumbs up to the Scotch product noted above. I've used it to attach three sports medallions to a friend's truck here in East Central Florida (hot sun) and it's been through uncounted car washes (who counts car washes?) and it's holding great. We use Eclipse sunshades for our windshields and the adhesive provided with the product eventually releases. After a thorough cleaning of the surface and application of the Scotch Outdoor Mounting tape, it's back for good. The sunshades have spring retractors that pull the shade open when released. When the sunshade is "engaged," in the closed position, the springs are applying constant shear force on the adhesive, all day, in the hot Florida sun, and it holds great. I found it important for the brackets to be attached and allowed to bond for a day, but your medallion is not likely to have much force applied, so an instant stick-on would work just fine.

Three inches in diameter is seven square inches. That's quite a bit of gripping power. Another good aspect of the tape is that it can be sliced off carefully with a sharp knife or razor blade and the remnants removed if needed.

The other post about VHB tape is also true. I've used quite a bit of VHB backed DualLock stuff and it holds even stronger, although it's typically a good bit thicker and more expensive.

Re: what Double back tape for 3" car medallion

null@example.com (dubbsd) — Sun, 21 Jun 2015 17:04:32 +0000

Tin

One of the things I worry about is that it will come loose from the heat. With the Sun beating down on the car the inside can reach well over 100°F and a lot pf people put the Medallion on the rear window.

Re: what Double back tape for 3" car medallion

null@example.com (Tin Falcon) — Sun, 21 Jun 2015 15:48:03 +0000

I usually keep a roll of outdoor mounting tape around. the stuff I have is clear silicone with red film to keep from sticking to itself.

should be available at you local WalMart or big box home center.
tin

Re: what Double back tape for 3" car medallion

null@example.com (pirvan) — Sun, 21 Jun 2015 14:58:52 +0000

If you want something tat won't come off even when hot, buy VHB tape. It comes in different sizes and thicknesses.

Nothing like it. It's even used in construction as an alternative to tack welding.

what Double back tape for 3" car medallion

null@example.com (dubbsd) — Sun, 21 Jun 2015 14:05:57 +0000

I have printed a 3" car medallion and need to Know what double back adhesion is best to stick it to a car?