<![CDATA[SoliForum - 3D Printing Community — How to change z home position away from glass bed]]> https://www.soliforum.com/topic/11483/how-to-change-z-home-position-away-from-glass-bed/ Mon, 15 Jun 2015 00:46:22 +0000 PunBB <![CDATA[Re: How to change z home position away from glass bed]]> https://www.soliforum.com/post/98936/#p98936 well you can add it to end g code I suppose I just went to the repetier printer settings , go to the printer page about half way down is the park position   settings just plug in the numbers and make sure you check park after print kill.
Tin

]]> Mon, 15 Jun 2015 00:46:22 +0000 https://www.soliforum.com/post/98936/#p98936 <![CDATA[Re: How to change z home position away from glass bed]]> https://www.soliforum.com/post/98923/#p98923 New to Gcode here. what would be the Gcode to park it?

]]> Sun, 14 Jun 2015 21:10:38 +0000 https://www.soliforum.com/post/98923/#p98923 <![CDATA[Re: How to change z home position away from glass bed]]> https://www.soliforum.com/post/98920/#p98920 cool.  thanks. I did not think of that

]]> Sun, 14 Jun 2015 21:06:24 +0000 https://www.soliforum.com/post/98920/#p98920 <![CDATA[Re: How to change z home position away from glass bed]]> https://www.soliforum.com/post/98918/#p98918 Soo have it park after a print and set up your park position as you like.
Tin

]]> Sun, 14 Jun 2015 20:09:06 +0000 https://www.soliforum.com/post/98918/#p98918 <![CDATA[Re: How to change z home position away from glass bed]]> https://www.soliforum.com/post/98916/#p98916 Because after it finishes a print, the head comes back to home position touching the glass and will smash my print

]]> Sun, 14 Jun 2015 19:54:48 +0000 https://www.soliforum.com/post/98916/#p98916 <![CDATA[Re: How to change z home position away from glass bed]]> https://www.soliforum.com/post/98900/#p98900 hansen644 wrote:

Hi I am using repetier host and repetier firmware.  right now my home z axis position is where it touches the glass bed of my smartone 200 printer.  How would I change the home position to be maybe 30mm or more away from the bed glass then come down to the correct height when it starts to print?

Why would you want to do that? As long as the head is starting at the correct height that is all that matters.

]]> Sun, 14 Jun 2015 16:42:27 +0000 https://www.soliforum.com/post/98900/#p98900 <![CDATA[How to change z home position away from glass bed]]> https://www.soliforum.com/post/98894/#p98894 Hi I am using repetier host and repetier firmware.  right now my home z axis position is where it touches the glass bed of my smartone 200 printer.  How would I change the home position to be maybe 30mm or more away from the bed glass then come down to the correct height when it starts to print?

]]> Sun, 14 Jun 2015 14:57:19 +0000 https://www.soliforum.com/post/98894/#p98894