<![CDATA[SoliForum - 3D Printing Community — Error Code 0030 Da vinci AIO]]> https://www.soliforum.com/topic/11473/error-code-0030-da-vinci-aio/ Mon, 22 Jun 2015 00:21:16 +0000 PunBB <![CDATA[Re: Error Code 0030 Da vinci AIO]]> https://www.soliforum.com/post/99579/#p99579 carl_m1968 wrote:
Poppleboy wrote:
carl_m1968 wrote:

The error code is misleading. There is not an issue with the motor, the issue is with that home sensor on that axis.

Ive switched the sensors already and still got the same error code.

and the wiring is good on the sensor? You checked it by having it flexed while you measure continuity from end to end?

I haven't checked it while flex it but it seems to have continuity. I rip apart and old wir and shoved a few of the little strands into each of the four slots. I got static beeps but I figured that was because I was using multiple mini wires and my connections werent solid.

]]> Mon, 22 Jun 2015 00:21:16 +0000 https://www.soliforum.com/post/99579/#p99579 <![CDATA[Re: Error Code 0030 Da vinci AIO]]> https://www.soliforum.com/post/98876/#p98876 Poppleboy wrote:
carl_m1968 wrote:

The error code is misleading. There is not an issue with the motor, the issue is with that home sensor on that axis.

Ive switched the sensors already and still got the same error code.

and the wiring is good on the sensor? You checked it by having it flexed while you measure continuity from end to end?

]]> Sun, 14 Jun 2015 01:48:12 +0000 https://www.soliforum.com/post/98876/#p98876 <![CDATA[Re: Error Code 0030 Da vinci AIO]]> https://www.soliforum.com/post/98863/#p98863 carl_m1968 wrote:

The error code is misleading. There is not an issue with the motor, the issue is with that home sensor on that axis.

Ive switched the sensors already and still got the same error code.

]]> Sat, 13 Jun 2015 23:59:54 +0000 https://www.soliforum.com/post/98863/#p98863 <![CDATA[Re: Error Code 0030 Da vinci AIO]]> https://www.soliforum.com/post/98841/#p98841 The error code is misleading. There is not an issue with the motor, the issue is with that home sensor on that axis.

]]> Sat, 13 Jun 2015 20:28:43 +0000 https://www.soliforum.com/post/98841/#p98841 <![CDATA[Re: Error Code 0030 Da vinci AIO]]> https://www.soliforum.com/post/98838/#p98838 OMSmedia wrote:

A few things to check:
https://youtu.be/L-q7hUOLyy0

Ive checked the wiring harness witha multi meter all wires give me like static beeps? Maybe a loose connection? Otherwise I dont think its the wires. I dont know how to check the motor. I switched the x and y wires in the back panel. Once turning on the machine the x axis motor went all the way left and than just rumbled.

]]> Sat, 13 Jun 2015 18:47:28 +0000 https://www.soliforum.com/post/98838/#p98838 <![CDATA[Re: Error Code 0030 Da vinci AIO]]> https://www.soliforum.com/post/98781/#p98781 A few things to check:
https://youtu.be/L-q7hUOLyy0

]]> Fri, 12 Jun 2015 20:30:02 +0000 https://www.soliforum.com/post/98781/#p98781 <![CDATA[Error Code 0030 Da vinci AIO]]> https://www.soliforum.com/post/98780/#p98780 So I purchased this used it a bit and it broke. Error code 0030 and its not the sensors. Will Cost me $250 atleast to send and repair at their facility when the printer only cost $800.

Advice on what I should do or how I show troubleshoot this? From my opinion it looks like the x Motor is malfunctioning. Then I turn on the machine with it in its home position it moves left on the x axis just outside the-the sensor than the error pops up. If I start the machine with it not homed the error will pop up right away.

Maybe local 3d printer repair services on east coast somewhere?
Any replies would be awesome

]]> Fri, 12 Jun 2015 19:34:50 +0000 https://www.soliforum.com/post/98780/#p98780