<![CDATA[SoliForum - 3D Printing Community — Problem with Type a macines series 1]]> https://www.soliforum.com/topic/11383/problem-with-type-a-macines-series-1/ Thu, 04 Jun 2015 13:23:54 +0000 PunBB <![CDATA[Re: Problem with Type a macines series 1]]> https://www.soliforum.com/post/97917/#p97917 Or the VREF could just be too far off and needs adjusting instead of replacing.

]]> Thu, 04 Jun 2015 13:23:54 +0000 https://www.soliforum.com/post/97917/#p97917 <![CDATA[Re: Problem with Type a macines series 1]]> https://www.soliforum.com/post/97910/#p97910 If there isn't a mechanical binding (stuck belt, that sort of thing) I would check the stepper motor driver. If your board has a removable driver, you can get a new one for a few dollars and swap it out, or simply swap the x and y steppers to see if the problem moves. If it does, the stepper driver is bad.

]]> Thu, 04 Jun 2015 11:35:31 +0000 https://www.soliforum.com/post/97910/#p97910 <![CDATA[Problem with Type a macines series 1]]> https://www.soliforum.com/post/97909/#p97909 Hello.

My Type a macines series 1 has broken sad I'm trying to move the extruder by X using this program Pronterface.  But there is only some noise. Engine makes a noise, but without moving. Y and Z work smoothly.

What's already done: printer hardware reflashed, pc software reflashed, new engine.

What else? Thanks!

]]> Thu, 04 Jun 2015 10:27:44 +0000 https://www.soliforum.com/post/97909/#p97909