https://www.soliforum.com/topic/10865/model-printing-doesnt-start/ Sun, 26 Apr 2015 13:35:51 +0000 PunBB https://www.soliforum.com/post/94188/#p94188 Make sure you have your computer set to English (USA).

]]> Sun, 26 Apr 2015 13:35:51 +0000 https://www.soliforum.com/post/94188/#p94188 https://www.soliforum.com/post/93708/#p93708 I had a similar problem with a model I created using SketchUp.  It turned out the STL file that I exported out of SketchUp had some errors that caused my model to be non-printable.  The Slic3r that's built into SoliPrint choked on the STL file without popping up any error messages.  After I repaired my STL fine using netfabb it printed fine using SoliPrint.

]]> Tue, 21 Apr 2015 22:33:54 +0000 https://www.soliforum.com/post/93708/#p93708 https://www.soliforum.com/post/93702/#p93702 No. I had the same problem, switched to Repetier Host.

]]> Tue, 21 Apr 2015 21:54:02 +0000 https://www.soliforum.com/post/93702/#p93702 https://www.soliforum.com/post/93701/#p93701 Hello, I did all starting procedures, calibrating is fine (extruder works, X and Y axis move correctly, Z works).
Also the model seems loaded correctly. Eventually the printing doesn't starts.
When I press the "print" button the process green bar loads the very first part and then it stops.
I have been trying also with old version of the software but nothing changes.
Anyone knows how to make it start?

]]> Tue, 21 Apr 2015 21:22:06 +0000 https://www.soliforum.com/post/93701/#p93701