<![CDATA[SoliForum - 3D Printing Community — Circle issues with 1.0 DaVinci]]> https://www.soliforum.com/topic/10777/circle-issues-with-10-davinci/ Fri, 17 Apr 2015 00:33:22 +0000 PunBB <![CDATA[Re: Circle issues with 1.0 DaVinci]]> https://www.soliforum.com/post/93227/#p93227 I'm using Simplify3d with the default settings for the Da Vinci. I usually print at .2 layer height with two shells. When I use infill, it can be anywhere from 15% to 85% depending on how strong I need something to be.

If I'm printing something big or something that needs to be stronger outside, I print with three shells.

]]> Fri, 17 Apr 2015 00:33:22 +0000 https://www.soliforum.com/post/93227/#p93227 <![CDATA[Re: Circle issues with 1.0 DaVinci]]> https://www.soliforum.com/post/93226/#p93226 Can I see what config works best for you for detail?  Mine is good but a little off, I printed a few of the parts you had lised.

]]> Fri, 17 Apr 2015 00:29:06 +0000 https://www.soliforum.com/post/93226/#p93226 <![CDATA[Re: Circle issues with 1.0 DaVinci]]> https://www.soliforum.com/post/93179/#p93179 Good idea

]]> Thu, 16 Apr 2015 16:44:14 +0000 https://www.soliforum.com/post/93179/#p93179 <![CDATA[Re: Circle issues with 1.0 DaVinci]]> https://www.soliforum.com/post/93043/#p93043 How about these: https://www.thingiverse.com/thing:644973  big_smile

]]> Wed, 15 Apr 2015 14:40:09 +0000 https://www.soliforum.com/post/93043/#p93043 <![CDATA[Re: Circle issues with 1.0 DaVinci]]> https://www.soliforum.com/post/93042/#p93042 I overlooked that one crack, its crazy it's like that.  I wish someone made metal ones.. Thanks again for all the help, I printed one and since I'm home from my shift will print 4 more for spare. Any other parts you recommend to print?

]]> Wed, 15 Apr 2015 14:38:08 +0000 https://www.soliforum.com/post/93042/#p93042 <![CDATA[Re: Circle issues with 1.0 DaVinci]]> https://www.soliforum.com/post/92903/#p92903 Hopefully the glue will hold until you can make some replacements. I would make a replacement set right away.

I read about the poor quality bearing mount issue right after I got my printer so they were among the first things I made.

]]> Mon, 13 Apr 2015 21:17:00 +0000 https://www.soliforum.com/post/92903/#p92903 <![CDATA[Re: Circle issues with 1.0 DaVinci]]> https://www.soliforum.com/post/92901/#p92901 Now I can make more firefighter wedges for the guys at work lol

]]> Mon, 13 Apr 2015 20:19:39 +0000 https://www.soliforum.com/post/92901/#p92901 <![CDATA[Re: Circle issues with 1.0 DaVinci]]> https://www.soliforum.com/post/92900/#p92900 http://s22.postimg.org/justee2ld/20150413_150145_1.jpg

]]> Mon, 13 Apr 2015 20:19:11 +0000 https://www.soliforum.com/post/92900/#p92900 <![CDATA[Re: Circle issues with 1.0 DaVinci]]> https://www.soliforum.com/post/92899/#p92899 Super glued it and placed it back in the printer! Will post the picture of the old print vs new in a second. Thank you so much for the help and offer. I didn't think it would work if I glued it but it was worth a shot! This shows how many problems a small amount of movement will cause in this printer...

Posting link after print

]]> Mon, 13 Apr 2015 19:55:28 +0000 https://www.soliforum.com/post/92899/#p92899 <![CDATA[Re: Circle issues with 1.0 DaVinci]]> https://www.soliforum.com/post/92884/#p92884 I'm in Windsor, I can send two to you. You can PayPal me the postage.

I printed a bunch back when I first started using my machine.

They will require some finishing with a file though because they still have the raft debris on one side.

These are the ones I made: http://www.thingiverse.com/thing:382437

]]> Mon, 13 Apr 2015 18:17:02 +0000 https://www.soliforum.com/post/92884/#p92884 <![CDATA[Re: Circle issues with 1.0 DaVinci]]> https://www.soliforum.com/post/92882/#p92882 usa, texas =P Not sure what the mail would be on that

]]> Mon, 13 Apr 2015 18:09:41 +0000 https://www.soliforum.com/post/92882/#p92882 <![CDATA[Re: Circle issues with 1.0 DaVinci]]> https://www.soliforum.com/post/92873/#p92873 I have a handful available too.

]]> Mon, 13 Apr 2015 16:34:13 +0000 https://www.soliforum.com/post/92873/#p92873 <![CDATA[Re: Circle issues with 1.0 DaVinci]]> https://www.soliforum.com/post/92869/#p92869 If you're in the UK, I have a couple of ABS mounts I printed as spares you could have.

]]> Mon, 13 Apr 2015 16:17:32 +0000 https://www.soliforum.com/post/92869/#p92869 <![CDATA[Re: Circle issues with 1.0 DaVinci]]> https://www.soliforum.com/post/92866/#p92866 Wow, did find one cracked bearing mount in the back right.. Do you know a place where I can order a metal mount or I guess ABS since I cant print a good one?

]]> Mon, 13 Apr 2015 15:46:58 +0000 https://www.soliforum.com/post/92866/#p92866 <![CDATA[Re: Circle issues with 1.0 DaVinci]]> https://www.soliforum.com/post/92864/#p92864 arturnoole163 wrote:

Have you also checked that both of your Y-carrages (left and right) are aligned to each other. If they are off even couple of notches of the belt it can also result in circles being ovals.

This. Probably the most overlooked issue with this printer.

]]> Mon, 13 Apr 2015 15:32:06 +0000 https://www.soliforum.com/post/92864/#p92864