<![CDATA[SoliForum - 3D Printing Community — MK9 Mod gear questions]]> https://www.soliforum.com/topic/10696/mk9-mod-gear-questions/ Mon, 06 Apr 2015 17:41:08 +0000 PunBB <![CDATA[Re: MK9 Mod gear questions]]> https://www.soliforum.com/post/92199/#p92199 Okay thanks again. Looks like the MK9 gear is makerbot and has 26 teeth. Not sure how many teeth the davinci has.

]]> Mon, 06 Apr 2015 17:41:08 +0000 https://www.soliforum.com/post/92199/#p92199 <![CDATA[Re: MK9 Mod gear questions]]> https://www.soliforum.com/post/92195/#p92195 barry1685 wrote:

Thanks for the heads up. is this done in repetier? I wonder if S3d can do this too.

It can only be done if you have flashed to repetier firmware. The you can make the change through the EEPROM settings in Repetier host or make the changes in Adruino before you upload the firmware.

]]> Mon, 06 Apr 2015 17:06:34 +0000 https://www.soliforum.com/post/92195/#p92195 <![CDATA[Re: MK9 Mod gear questions]]> https://www.soliforum.com/post/92194/#p92194 Thanks for the heads up. is this done in repetier? I wonder if S3d can do this too.

]]> Mon, 06 Apr 2015 16:55:03 +0000 https://www.soliforum.com/post/92194/#p92194 <![CDATA[Re: MK9 Mod gear questions]]> https://www.soliforum.com/post/92179/#p92179 barry1685 wrote:

So I have been having problems with my davinci extruder jamming a lot and nothing seems to fix it so I modded the x carriage to hold my mk9 extruder. Does anyone know if the gears are too tight if there is "light" teeth marks in the filament when its feeding the filament?

There should be teeth marks. Unless that  new gear id exactly the same diameter and tooth count as stock you will need to change your steps per mm on the extruder. This cant be done on stock firmware and if yhe gear is different and this is not changed, your feed volume will be wrong.

]]> Mon, 06 Apr 2015 15:48:59 +0000 https://www.soliforum.com/post/92179/#p92179 <![CDATA[MK9 Mod gear questions]]> https://www.soliforum.com/post/92150/#p92150 So I have been having problems with my davinci extruder jamming a lot and nothing seems to fix it so I modded the x carriage to hold my mk9 extruder. Does anyone know if the gears are too tight if there is "light" teeth marks in the filament when its feeding the filament?

]]> Mon, 06 Apr 2015 13:06:25 +0000 https://www.soliforum.com/post/92150/#p92150