https://www.soliforum.com/topic/10643/round-circles/ Thu, 02 Apr 2015 04:45:20 +0000 PunBB https://www.soliforum.com/post/91745/#p91745 +1 and over-tightening belts can cause them to stretch making the teeth on the belt and pulley mesh poorly, causing backlash. Check the alignment of your belts as well and make sure they are aligned with the back rod, the carriages, and the front idler pulleys.

]]> Thu, 02 Apr 2015 04:45:20 +0000 https://www.soliforum.com/post/91745/#p91745 https://www.soliforum.com/post/91743/#p91743 You may have overtightened now possibly.. Binding causes out of round..

]]> Thu, 02 Apr 2015 04:32:46 +0000 https://www.soliforum.com/post/91743/#p91743 https://www.soliforum.com/post/91742/#p91742 What's the trick to printing round circles on the press? It looked like my circles were out of round because of a loose y axis belt, but they actually got worse after tightening it.

]]> Thu, 02 Apr 2015 04:00:18 +0000 https://www.soliforum.com/post/91742/#p91742