<![CDATA[SoliForum - 3D Printing Community — Trying to beef up Lawsy carriage, but Slicer never finishes]]> https://www.soliforum.com/topic/10534/trying-to-beef-up-lawsy-carriage-but-slicer-never-finishes/ Fri, 27 Mar 2015 18:17:16 +0000 PunBB <![CDATA[Re: Trying to beef up Lawsy carriage, but Slicer never finishes]]> https://www.soliforum.com/post/91108/#p91108 Link for netfabb.

https://modelrepair.azurewebsites.net/

works for me when I have a stubborn stl.

]]> Fri, 27 Mar 2015 18:17:16 +0000 https://www.soliforum.com/post/91108/#p91108 <![CDATA[Re: Trying to beef up Lawsy carriage, but Slicer never finishes]]> https://www.soliforum.com/post/91065/#p91065 fxdata wrote:

Took your skp file exported as a binary stl mm. Used netfabb to do the repair. Checked in Slic3r it didn't give an error. Try the attached file after the repair was done.

Worked great, many thanks!

]]> Fri, 27 Mar 2015 08:33:16 +0000 https://www.soliforum.com/post/91065/#p91065 <![CDATA[Re: Trying to beef up Lawsy carriage, but Slicer never finishes]]> https://www.soliforum.com/post/90828/#p90828 fxdata wrote:

Took your skp file exported as a binary stl mm. Used netfabb to do the repair. Checked in Slic3r it didn't give an error. Try the attached file after the repair was done.

Seems to slice OK, it's in the queue for printing...

Thanks!

]]> Wed, 25 Mar 2015 20:22:32 +0000 https://www.soliforum.com/post/90828/#p90828 <![CDATA[Re: Trying to beef up Lawsy carriage, but Slicer never finishes]]> https://www.soliforum.com/post/90757/#p90757 Took your skp file exported as a binary stl mm. Used netfabb to do the repair. Checked in Slic3r it didn't give an error. Try the attached file after the repair was done.

]]> Wed, 25 Mar 2015 03:11:42 +0000 https://www.soliforum.com/post/90757/#p90757 <![CDATA[Trying to beef up Lawsy carriage, but Slicer never finishes]]> https://www.soliforum.com/post/90741/#p90741 So I'm trying to build:

http://geekho.com/push/WPNS_Lawsy_Right_2.skp
http://geekho.com/push/WPNS_Lawsy_Right_2.stl

and Slic3r keeps throwing:

Unable to close this loop having <nn> points

Errors and essentially never completes.  I've tried Solid Inspector2 and it only found one error.  I tried Cleanup3 and when it tried to do "Merge Faces" it finds 72 errors, loses some geometry, and pretty much destroys the model.

Any other tools I should be using?  Any idea what's wrong with my model?  I started with Lawsy's .skp file, thickened the base, and made the top belt bolt holder a little thicker too.

Thanks!

]]> Wed, 25 Mar 2015 01:27:04 +0000 https://www.soliforum.com/post/90741/#p90741