<![CDATA[SoliForum - 3D Printing Community — Davinci Massive offset printing]]> https://www.soliforum.com/topic/10520/davinci-massive-offset-printing/ Fri, 27 Mar 2015 15:48:44 +0000 PunBB <![CDATA[Re: Davinci Massive offset printing]]> https://www.soliforum.com/post/91091/#p91091 The problem is narrowed down to 1.0A and RH .92.  It doesn't pertain to the 1.0's



carl_m1968 wrote:
humanisticnick wrote:

super common issue with 1.0A on .92.... No solution yet...

http://voltivo.com/forum/davinci-peersu … port-group

I use .91 on my 1.0 and have never seen this issue.

]]> Fri, 27 Mar 2015 15:48:44 +0000 https://www.soliforum.com/post/91091/#p91091 <![CDATA[Re: Davinci Massive offset printing]]> https://www.soliforum.com/post/91045/#p91045 humanisticnick wrote:

super common issue with 1.0A on .92.... No solution yet...

http://voltivo.com/forum/davinci-peersu … port-group

I use .91 on my 1.0 and have never seen this issue.

]]> Fri, 27 Mar 2015 01:41:25 +0000 https://www.soliforum.com/post/91045/#p91045 <![CDATA[Re: Davinci Massive offset printing]]> https://www.soliforum.com/post/91044/#p91044 super common issue with 1.0A on .92.... No solution yet...

http://voltivo.com/forum/davinci-peersu … port-group

]]> Fri, 27 Mar 2015 01:23:08 +0000 https://www.soliforum.com/post/91044/#p91044 <![CDATA[Re: Davinci Massive offset printing]]> https://www.soliforum.com/post/90774/#p90774 I had issues with the slicer.  Are you printing with a file you have printed successfully before?

]]> Wed, 25 Mar 2015 13:56:19 +0000 https://www.soliforum.com/post/90774/#p90774 <![CDATA[Re: Davinci Massive offset printing]]> https://www.soliforum.com/post/90707/#p90707 you think so even after it side steps it continues to print?...i've noticed that the x and y axis displayed on the screen are true to where it should be not where it actually is.

]]> Tue, 24 Mar 2015 19:08:49 +0000 https://www.soliforum.com/post/90707/#p90707 <![CDATA[Re: Davinci Massive offset printing]]> https://www.soliforum.com/post/90636/#p90636 3dchromeconcepts wrote:

So I have updated the Davinci 1.0a to the latest .92 repetier.  Was printing along great.  Lots of great printing.  Then one was shifted.  Thought nothing of it till it got progressively worse.  Now I cant print anything without the print head moves on the x axis but the y axis is still moving a bit.  I have uploaded firmware several times even reverting back to xyz firmware.  cant seem to get a goo xyz to work either.  Checked belt tensions, Stepper motor wiring swaps.  I am including a picture of the last print I tried.  first layer is where this goes all wrong every print no matter what slicer I am using.  HELLLPPP!!!!!! lol

Looks like you have some steppers that are dying if you have tried all of the above and it looks good after it is sliced.

]]> Tue, 24 Mar 2015 00:15:46 +0000 https://www.soliforum.com/post/90636/#p90636 <![CDATA[Davinci Massive offset printing]]> https://www.soliforum.com/post/90634/#p90634 So I have updated the Davinci 1.0a to the latest .92 repetier.  Was printing along great.  Lots of great printing.  Then one was shifted.  Thought nothing of it till it got progressively worse.  Now I cant print anything without the print head moves on the x axis but the y axis is still moving a bit.  I have uploaded firmware several times even reverting back to xyz firmware.  cant seem to get a goo xyz to work either.  Checked belt tensions, Stepper motor wiring swaps.  I am including a picture of the last print I tried.  first layer is where this goes all wrong every print no matter what slicer I am using.  HELLLPPP!!!!!! lol

]]> Mon, 23 Mar 2015 23:38:40 +0000 https://www.soliforum.com/post/90634/#p90634