<![CDATA[SoliForum - 3D Printing Community — Welcome to ATLAS 3D & FreeLSS]]> https://www.soliforum.com/topic/10465/welcome-to-atlas-3d-freelss/ Sat, 07 Jan 2017 20:05:26 +0000 PunBB <![CDATA[Re: Welcome to ATLAS 3D & FreeLSS]]> https://www.soliforum.com/post/130698/#p130698 Hi pirvan, I want to build a freelss scanner with a raspberry pi 2 , what diagram do you recommend?

thanks smile

]]> Sat, 07 Jan 2017 20:05:26 +0000 https://www.soliforum.com/post/130698/#p130698 <![CDATA[Re: Welcome to ATLAS 3D & FreeLSS]]> https://www.soliforum.com/post/127778/#p127778 Hi Kev.  Welcome to the forum!

]]> Thu, 27 Oct 2016 22:45:40 +0000 https://www.soliforum.com/post/127778/#p127778 <![CDATA[Re: Welcome to ATLAS 3D & FreeLSS]]> https://www.soliforum.com/post/127755/#p127755 Hi all, my name is Kev and I would like to introduce myself to this community. I am 46 old years wink and I live in the midlands, England.
I have a couple of weeks ago just finished building a part-by-part 3D printer called the Atlas V3, which isn't too bad for a first 3d printer. I have also recently purchased a 2nd hand Atlas 3D scanner and it arrived a few days ago, so it has had a few test runs and seems to be running ok except for some tweaking here and there. I joined these forums too expand my knowledge and help others who may have problems etc.
I hope i can be a valuable member smile

]]> Thu, 27 Oct 2016 10:20:17 +0000 https://www.soliforum.com/post/127755/#p127755 <![CDATA[Re: Welcome to ATLAS 3D & FreeLSS]]> https://www.soliforum.com/post/125783/#p125783 Hi,
congratulations for the powerful of this project.

I've just finished to assemble my 3D scanner.
I bought a Waveshare ir camera model (F) with adjustable focus and to connected to a Pi model 2.
I made an aluminum frame with a wooden turn-table but now I've some problems with the setup.
Does anyone have never made a similar solution? There is a lens correction on the software?

I've installed FreeLSS 1.11.

Thanks.

]]> Tue, 02 Aug 2016 16:35:10 +0000 https://www.soliforum.com/post/125783/#p125783 <![CDATA[Re: Welcome to ATLAS 3D & FreeLSS]]> https://www.soliforum.com/post/124970/#p124970 Hello,

Nice community and one amazing scanner with excellent results.
I am now waiting patiently to get my software licence.
(I'm sorry but I had to buy the parts in Europe to skip VAT and customs taxes)

After a quick and easy assembly I now have  a few test scans that look impressively good considering the lack of calibration.

Setup is RPI3 + Camera V2, wifi connected, currently running freelss from github.

I will have to calibrate it better but am now playing with it while waiting for the licence to arrive. No 8MP available at the moment, I will dig deeper after software is complete and up to date.

Cheers Uriah!

See you all around!

]]> Mon, 11 Jul 2016 21:30:33 +0000 https://www.soliforum.com/post/124970/#p124970 <![CDATA[Re: Welcome to ATLAS 3D & FreeLSS]]> https://www.soliforum.com/post/124771/#p124771 Uriah or somebody else !
Which Light in teh room ? Dark or with a strong ligh ?
Any help ?

Thanks
Franlit

]]> Mon, 04 Jul 2016 10:57:30 +0000 https://www.soliforum.com/post/124771/#p124771 <![CDATA[Re: Welcome to ATLAS 3D & FreeLSS]]> https://www.soliforum.com/post/124288/#p124288 And a basis question : how many ligth in the romm , Dark or a directional light on the subject or ?
Thanks

]]> Sat, 18 Jun 2016 08:16:55 +0000 https://www.soliforum.com/post/124288/#p124288 <![CDATA[Re: Welcome to ATLAS 3D & FreeLSS]]> https://www.soliforum.com/post/124275/#p124275 Hi Uriah
A scan of a can (look better)
http://soliforum.com/i/?pedHgQ4.jpg
in Mashlab
http://soliforum.com/i/?4WcJTek.jpg
Thanks

]]> Fri, 17 Jun 2016 19:10:34 +0000 https://www.soliforum.com/post/124275/#p124275 <![CDATA[Re: Welcome to ATLAS 3D & FreeLSS]]> https://www.soliforum.com/post/124156/#p124156 Franlit, Can you scan a simple known shape such as a soda can in binary PLY mode so that I can get a better idea of what's going on?  Thanks.

]]> Tue, 14 Jun 2016 21:14:21 +0000 https://www.soliforum.com/post/124156/#p124156 <![CDATA[Re: Welcome to ATLAS 3D & FreeLSS]]> https://www.soliforum.com/post/124034/#p124034 Hi Uriah

Thanks I save the new Serial Number.
A view of my first scan http://soliforum.com/i/?tNJr8oY.jpg
It s a cat (without any change)
If you have any tips.
Franlit

]]> Sat, 11 Jun 2016 09:39:45 +0000 https://www.soliforum.com/post/124034/#p124034 <![CDATA[Re: Welcome to ATLAS 3D & FreeLSS]]> https://www.soliforum.com/post/123810/#p123810 Please post a picture of the STL file showing what is wrong with it.  Also, please do not post your serial number publicly.  Your serial number has been revoked and new one has been emailed to you.

- Uriah

]]> Mon, 06 Jun 2016 22:55:34 +0000 https://www.soliforum.com/post/123810/#p123810 <![CDATA[Re: Welcome to ATLAS 3D & FreeLSS]]> https://www.soliforum.com/post/123754/#p123754 Hi Uriah

It's Work i calibrate the scanner and update the software without problem.
I try to do a first scan but the stl is wrong.
the Log

FreeLSS Version: 1.18
Preset: High Resolution
Range: 360 degrees
Total Seconds per frame:    3.88545
Unaccounted time:    0.457622%
Image Acquisition:    50.9998%, 1.98157 seconds per frame.
Image Processing:    44.4122%, 1.72561 seconds per frame.
Laser Time:    0.000899144%, 3.49358e-05 seconds per frame.
Point Mapping:    0.473045%
Point Processing:    0.379305%
Table Rotation:    3.16418%
Laser Merging:    0.050208%
PLY Writing:    0.0383587%
STL Writing:    0.0154993%
XYZ Writing:    0%
Facetization:    0.00891217%
Num Frame Retries:    0
Num Frames:    800
Num Empties:    0
Point Memory:    0 MB
Total Time (min):    51.806

presets.Calibration.laserSide=1
presets.Calibration.cameraMode=4
presets.Calibration.laserThreshold=8
presets.Calibration.minLaserWidth=5
presets.Calibration.maxLaserWidth=80
presets.Calibration.maxObjectSize=215.9
presets.Calibration.maxTriangleEdgeLength=12
presets.Calibration.numLaserRowBins=4
presets.Calibration.stabilityDelay=100000
presets.Calibration.framesPerRevolution=800
presets.Calibration.generateXyz=0
presets.Calibration.generateStl=1
presets.Calibration.generatePly=1
presets.Calibration.groundPlaneHeight=0
presets.Calibration.laserMergeAction=0
presets.Calibration.plyDataFormat=1
presets.Calibration.enableBurstModeForStillImages=0
presets.Calibration.createBaseForObject=1
presets.Calibration.noiseRemovalSetting=2
presets.Calibration.imageThresholdMode=2
presets.Calibration.cameraExposureTime=0
presets.Default.laserSide=2
presets.Default.cameraMode=2
presets.Default.laserThreshold=20
presets.Default.minLaserWidth=5
presets.Default.maxLaserWidth=80
presets.Default.maxObjectSize=215.9
presets.Default.maxTriangleEdgeLength=12
presets.Default.numLaserRowBins=4
presets.Default.stabilityDelay=100000
presets.Default.framesPerRevolution=800
presets.Default.generateXyz=0
presets.Default.generateStl=1
presets.Default.generatePly=1
presets.Default.groundPlaneHeight=0
presets.Default.laserMergeAction=0
presets.Default.plyDataFormat=1
presets.Default.enableBurstModeForStillImages=0
presets.Default.createBaseForObject=1
presets.Default.noiseRemovalSetting=2
presets.Default.imageThresholdMode=2
presets.Default.cameraExposureTime=4
presets.High Resolution.laserSide=2
presets.High Resolution.cameraMode=0
presets.High Resolution.laserThreshold=8
presets.High Resolution.minLaserWidth=5
presets.High Resolution.maxLaserWidth=80
presets.High Resolution.maxObjectSize=215.9
presets.High Resolution.maxTriangleEdgeLength=12
presets.High Resolution.numLaserRowBins=4
presets.High Resolution.stabilityDelay=100000
presets.High Resolution.framesPerRevolution=800
presets.High Resolution.generateXyz=0
presets.High Resolution.generateStl=1
presets.High Resolution.generatePly=1
presets.High Resolution.groundPlaneHeight=0
presets.High Resolution.laserMergeAction=0
presets.High Resolution.plyDataFormat=1
presets.High Resolution.enableBurstModeForStillImages=0
presets.High Resolution.createBaseForObject=1
presets.High Resolution.noiseRemovalSetting=2
presets.High Resolution.imageThresholdMode=2
presets.High Resolution.cameraExposureTime=0
presets.High Resolution.active=1
setup.cameraLocation.x=0
setup.cameraLocation.y=82.55
setup.cameraLocation.z=260.35
setup.leftLaserLocation.x=-125.73
setup.leftLaserLocation.y=82.55
setup.leftLaserLocation.z=260.35
setup.rightLaserLocation.x=125.73
setup.rightLaserLocation.y=82.55
setup.rightLaserLocation.z=260.35
setup.rightLaserPin=4
setup.leftLaserPin=5
setup.motorEnablePin=0
setup.motorStepPin=7
setup.motorDirPin=1
setup.motorDirPinValue=0
setup.laserOnValue=1
setup.stepsPerRevolution=3200
setup.motorResponseDelay=2
setup.motorStepDelay=5000
setup.httpPort=80
setup.serialNumber=ADETVZ26
setup.unitOfLength=2
setup.haveLaserPlaneNormals=0
setup.enableLighting=0
setup.lightingPin=3
setup.enableAuthentication=0
setup.passwordHash=
setup.enableUsbNetworkConfig=1
setup.enableExperimental=0
setup.enableWebGLWhenAvailable=1
setup.enablePointCloudRenderer=1
setup.overrideFocalLength=0
setup.overriddenFocalLength=

Do you see anything wrong ? have you tips

]]> Sun, 05 Jun 2016 15:30:56 +0000 https://www.soliforum.com/post/123754/#p123754 <![CDATA[Re: Welcome to ATLAS 3D & FreeLSS]]> https://www.soliforum.com/post/123642/#p123642 Ok Uriah
Thanks, I will try to do that at Sunday.
Franlit

]]> Wed, 01 Jun 2016 16:36:04 +0000 https://www.soliforum.com/post/123642/#p123642 <![CDATA[Re: Welcome to ATLAS 3D & FreeLSS]]> https://www.soliforum.com/post/123624/#p123624 Hi Franlit,

You can log into the command prompt with a username of "pi" and a password of "raspberry", and then configure your WiFi with the instructions in the "Advanced" section of the instructions document.  After that, you can update the software to the latest version and use a USB stick to get your IP address in the future.

- Uriah

]]> Wed, 01 Jun 2016 01:33:23 +0000 https://www.soliforum.com/post/123624/#p123624 <![CDATA[Re: Welcome to ATLAS 3D & FreeLSS]]> https://www.soliforum.com/post/123594/#p123594 Uriah
I try with the Sd card as you wrote and now i think it is ok .
http://soliforum.com/i/?cl2Uvu0.jpg
I have now light at the Camera as you show in the video.

I can now try  to go with the USB Stick or ?

Thanks for your help
Franlit

]]> Tue, 31 May 2016 18:21:36 +0000 https://www.soliforum.com/post/123594/#p123594