SoliForum - 3D Printing Community — Poorman's X-Y Stepper Calibration

Re: Poorman's X-Y Stepper Calibration

null@example.com (IanJohnson) — Fri, 18 Jan 2013 08:18:38 +0000

Neil (Jinja) designed a dial indicator mount that lets you point it at the front and sides to check calibration there. It doesn't work with the jigsaw replacement though. Maybe a version could be made to go in the universal mount Lawsy designed for the mark 3.

Re: Poorman's X-Y Stepper Calibration

null@example.com (Tomek) — Fri, 18 Jan 2013 06:53:17 +0000

Ian's dial gauge is for measuring the levelness of the bed..

But! Still a nice idea. I usually print a 50mm hollow box a half centimeter up, or the few times when I was testing my x&y. They do not really need to be calibrated as much as the extruder does, though.

Poorman's X-Y Stepper Calibration

null@example.com (qac1991) — Thu, 17 Jan 2013 23:00:46 +0000

Hey all,
I believe Ian has .stls and a tutorial for calibrating the x and y stepper motors using a dial gauge. Being a college student( a broke on at the moment) I thought I could come up with a cheaper (and less accurate) way to calibrate the stepper motors. I made a simple part in solidworks to attach a pencil to the extruder and simply attached paper to the bed. I raised the bed until the tip of the pencil was touching the paper. Then I used Repetier's manual controls to move the solidoodle 100mm in both the x and y directions. I measured the lines with a caliper and it was almost spot on. My x moved 100.39mm and my y moved 99.78mm. Also the line thickness showed my bed was not level so I continued to adjust it until the line was consistent all over the bed. Eventually I'm going to make a similar part to test my z stepper.

Anyway, I figured I'd post a video, pics, and the .stl's incase anyone else doesn't have a dial gauge.

On a side note, can you set the steppers to a decimal? For example instead of 88 could I set the x to 87.76?

Video:
http://www.youtube.com/watch?v=qqZlAnfZ0l8