<![CDATA[SoliForum - 3D Printing Community — How to use 3rd party filament without repetier or resetting the EEPROM]]> https://www.soliforum.com/topic/10263/how-to-use-3rd-party-filament-without-repetier-or-resetting-the-eeprom/ Sat, 07 Mar 2015 14:45:11 +0000 PunBB <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> https://www.soliforum.com/post/88700/#p88700 carl_m1968 wrote:
tonyno wrote:

I tried to run OpenXYZWare, but, get the same errors that other people note on that forum.

Are you putting the Openware exe in your XYZ ware directory? The open version requires the original version to be on your system and it is tequited for the open version to be placed in the original versions directory. If I remember right it actually replaces the original versions exe. It needs all the other files the original used to run though.

Yes, I did all that was recommended.

]]> Sat, 07 Mar 2015 14:45:11 +0000 https://www.soliforum.com/post/88700/#p88700 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> https://www.soliforum.com/post/88656/#p88656 tonyno wrote:

I tried to run OpenXYZWare, but, get the same errors that other people note on that forum.

Are you putting the Openware exe in your XYZ ware directory? The open version requires the original version to be on your system and it is tequited for the open version to be placed in the original versions directory. If I remember right it actually replaces the original versions exe. It needs all the other files the original used to run though.

]]> Sat, 07 Mar 2015 01:36:55 +0000 https://www.soliforum.com/post/88656/#p88656 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> https://www.soliforum.com/post/88655/#p88655 Muledog17 wrote:

3DP01P

Yours is a 1.0, that is why you where able to do it. If you had a 1.0A then your serial number whould start as 3DP01A.

If it was sold to you as a 1.0A then got into the mix up as well with distributors not knowing there was a difference or how to tell the difference.

]]> Sat, 07 Mar 2015 01:32:33 +0000 https://www.soliforum.com/post/88655/#p88655 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> https://www.soliforum.com/post/88641/#p88641 I tried to run OpenXYZWare, but, get the same errors that other people note on that forum.

]]> Fri, 06 Mar 2015 23:58:48 +0000 https://www.soliforum.com/post/88641/#p88641 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> https://www.soliforum.com/post/88640/#p88640 3DP01P

]]> Fri, 06 Mar 2015 23:55:54 +0000 https://www.soliforum.com/post/88640/#p88640 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> https://www.soliforum.com/post/88636/#p88636 Muledog17 wrote:

I did it with mine. You just have to short JP1 on the printer and send the firmware with arduino IDE

What are the first 6 digits of your serial number?

]]> Fri, 06 Mar 2015 23:39:15 +0000 https://www.soliforum.com/post/88636/#p88636 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> https://www.soliforum.com/post/88619/#p88619 You have the old 1.0

]]> Fri, 06 Mar 2015 22:24:45 +0000 https://www.soliforum.com/post/88619/#p88619 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> https://www.soliforum.com/post/88615/#p88615 I did it with mine. You just have to short JP1 on the printer and send the firmware with arduino IDE

]]> Fri, 06 Mar 2015 21:55:38 +0000 https://www.soliforum.com/post/88615/#p88615 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> https://www.soliforum.com/post/88612/#p88612 You should note that there is no downgrading to 1.1.E for the newer Da Vinci 1.0A.

]]> Fri, 06 Mar 2015 21:35:19 +0000 https://www.soliforum.com/post/88612/#p88612 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> https://www.soliforum.com/post/88603/#p88603 You can find it here. http://voltivo.com/forum/davinci-softwa … e-open-mod

]]> Fri, 06 Mar 2015 19:28:51 +0000 https://www.soliforum.com/post/88603/#p88603 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> https://www.soliforum.com/post/88594/#p88594 Where can you find OpenXYZWare?

]]> Fri, 06 Mar 2015 18:35:43 +0000 https://www.soliforum.com/post/88594/#p88594 <![CDATA[How to use 3rd party filament without repetier or resetting the EEPROM]]> https://www.soliforum.com/post/88222/#p88222 All you have to do is downgrade to 1.1.E and use OpenXYZWare. It doesn't count down the amount of plastic you use. Have fun!

]]> Wed, 04 Mar 2015 12:45:16 +0000 https://www.soliforum.com/post/88222/#p88222