SoliForum - 3D Printing Community — The Latest in 3D Printing

Eco-friendly material

null@example.com (loveforcircuits) — Sat, 02 May 2026 18:16:29 +0000

If I want to make eco-friendly, non-toxic 3D-printed toys for children, which materials should I choose?

Womens From Your Town - No Selfie - Anonymous Sex Dating

null@example.com (kollinsb) — Tue, 24 Mar 2026 20:27:53 +0000

Private Lady In Your Town - No Selfie - Anonymous Casual Dating
https://PrivateLadyEscorts.com

Private Lady From Your Town - Anonymous Casual Dating - No Verify

NEW GIRLS
Sunsofi
Catalina
KATIE PEARL
KATIE PEARL
Eva LustFul
Lit1le Kitty
Anika Uwunikaav

FibreSeeker - High Strength Parts (900MPa)

null@example.com (blazetron) — Sat, 27 Dec 2025 07:31:53 +0000

https://www.kickstarter.com/projects/17 … 3d-printer

Google 900MPa:

900 MPa (Megapascals) strength signifies an extremely high yield or tensile strength, typical of advanced high-strength steels (AHSS) used in heavy-duty applications like cranes, heavy transport, and specialized construction, meaning it can withstand immense pushing or pulling forces before deforming or breaking, offering superior load-bearing capacity compared to standard steels

Someday I would like to print an entire gearbox. I wonder if this could be used for press fit bearings? Could be a game changer.

Elegoo Cebtauri Carbon Review

null@example.com (Bluesky18061999) — Tue, 28 Oct 2025 03:46:31 +0000

Hello ????
Hope you doing well, My name is Lee and I’m from Vietnam
Previously, I have used some of the printers such as Kingroon K3PS Pro, Anycubic Kobra 2 Neo, Bambu Lab A1 combo ( what a great printer) and now..Its a new printer from Elegoo Printer which is Elegoo Centauri Carbon.
So what is the reason for me to switch from the Bambu lab A1 to Elegoo when the Bambu lab is a really impressive printer ????.. The reason is I don’t want to print the multicolor projects so the AMS lite is quite a reductant to me.. and the second reason is may need to print some abs parts for my new RC car project.. I so decided to change the printer.
My first impression to the Elegoo Centauri Carbon is quite decent from the appearance, printing quality, the noise and also the 3d slicer software.
1. Appearance
The Elegoo Centauri Carbon is a fully enclosed 3D printer, which gives it a big advantage over most open-frame printers in the same price range.
Thanks to the enclosed design, it keeps the temperature stable inside the chamber — meaning you can print materials like ABS, ASA, or even PC-based filaments that usually warp or crack on cheaper open printers. That is the reason why I changed my printer.
2. Printing quality
When it comes to print quality, the Centauri Carbon actually delivers pretty impressive results straight out of the box. You can see some print sample I’ve tested when set up this machine.

The first few prints I did came out clean, with sharp details and very minimal stringing.
The CoreXZ motion system makes a noticeable difference too — it feels smoother and more stable compared to the typical Cartesian setup you see on most printers at this price.

Layer consistency is great, even at higher speeds, and the textured PEI plate gives good adhesion while still making it easy to pop the parts off once they cool down. The bed has 2 side ( Side A is for smooth surface while side B is for general print )
Overall, for a printer in this price range, the print quality really surprised me — it’s easily on par with machines that cost a lot more.

3. The noise
In terms of noise, the Centauri Carbon is actually pretty quiet, especially for an enclosed printer.
The enclosure itself helps block a good amount of sound, so even when it’s printing at higher speeds, it doesn’t get annoying. But the problem is when you print with the cover, the temperature inside the machine will increase and the alert will pop up on the touch panel. Some time I feel a little bit annoying with this problem.
You can still hear the fans and the stepper motors working, but it’s more of a low hum rather than that high-pitched noise you usually get from open-frame printers.
I’d say it’s quiet enough to run in the same room without being distracting — maybe not totally silent, but definitely one of the quieter ones I’ve used in this price range.
One big problem is I don’t understand while the fans still run when the print already finished...
So you don’t want to sleep in a room with 2 printer running like me.. It is a disaster ????
4. Slicer Software
If you are familiar with the Bambu lab slicer, You don’t need to learn anything to use this software.. The set up process is quite simple so just take me 2 minutes to complete..

So overall this printer is quite good in my opinion… what do you think ?

I’ve made a video on how to set up it from scratch… so if you are interested…Please kindly to check it ????
https://youtu.be/tksCRXsUVbw?si=ob2_HaYR-M-5AirE

3D printable models search engine makrs.co (in beta)

null@example.com (helman) — Sun, 31 Aug 2025 10:57:13 +0000

Hi,
Your feedback is highly appreciated, makrs.co (https://makrs.co/)
3D printable models search engine. (in beta)

xyz pro 1 w firmware version 1.3.8 error code 0040

null@example.com (knigel6) — Wed, 04 Jun 2025 15:39:06 +0000

Hi all I am a newby to this forum I am retired with time on my hands and I do have some history in building my own printers so I know the problems we all find, but I have recently had an xyz pro 1 printer given, I was given it because the previous owner had been a bit heavy handed with the extruder module which I managed to repair and start using the printer and I must say I thought it was very good until I started to print 2 maximum sized models at one session when the file size was too large for the sd card which gave me the first error. Upon investigating the sd card properties 2.5 Gb I proceeded to upgrade to an 8 Gb class 10 card. some time during this adventure I LOST the metal SD card retaining clip, I spent several hours trying to find it using everything I had including spy hole camera but alass it was not to be found and so i purchased a new card holder hopeing that the clip would fit the existing base but no such luck meaning that I had to desolder the original and fit the complete new unit then fit the new 8Gb card . Since then When I set the extruder to auto heat in the settings it never rises higher than 92 degrees and the minute I send a file to print
error code 0040 happens. My first thoughts was I had not done a good job soldering the new card holder but upon further inspection with a microscope I think that I did do a good job, all pins are soldered inline and central with the motherboard pads just like a professional. can someone send me some information to help fix this problem

I have formed the opinion that I must have a corrupt firmware can anyone tel me Where I can download the latest version fo a davinci xyz pro 1w printer

Help me download the Wind Duct.3w file

null@example.com (wnglng) — Sun, 04 Aug 2024 03:14:42 +0000

I can't open the official website and download the file. Please help me provide this model and upload it in the attachment of the following post. Thank you very much!

File Name: Wind Duct.3w
Wind Duct
File Source:
(You can download the 3D file from the website below and use your
da Vinci Jr. 1.0 Series 3D Printer for output)

http://us.gallery.xyzprinting.com/us_en … 2171056219

East Coast RepRap festival 2022

null@example.com (Tin Falcon) — Sat, 26 Feb 2022 00:28:37 +0000

East Coast RepRap festival will return once again for 2022
October 8th and 9th.In Bel air MD i expect the same location as the 2018 and 2019 shows details will be coming.
they are currently forming the sponsors list so if you have a 3d printing business now is your chance to be a vendor. Send them an email of intent or interest.
http://eastcoastreprapfestival.com/

The 2019 event was great, a bunch of 3d printing you tubers were there as well as lots of great exhibits and vendors.

E3d revo

null@example.com (Tin Falcon) — Sat, 20 Nov 2021 16:18:11 +0000

Anyone else exited about these coming to market ??

https://e3d-online.com/blogs/news/rapidchangerevo

Wants to know more about 3D printing

null@example.com (johnclark) — Mon, 27 Sep 2021 10:36:20 +0000

Hello, Everyone newcomer to this group. I am very keen to learn about 3D printers. Basically, I am a developer by profession. Basically, I develop the https://www.exactlly.com/blog/index.php … es-follow/ and related things. But now I have a great interest in 3D printing. So is there any particular software or related things used in 3D printing? And also wants to know which is the most powerful 3D printer. Because I am willing to buy a new 3D printer. Is there any simulator also present for 3D printing? If anyone gives me these answers then it will be very helpful to me. Thanks in advance.

3D Printing Adoption Survey

null@example.com (reza) — Sat, 31 Jul 2021 11:53:44 +0000

3D Printing within the construction industry survey for masters thesis.

Hi all! It would be immensely helpful for my research if you took part in the survey below. Thank you!

https://qfreeaccountssjc1.az1.qualtrics … g6mPVqWdo?

The fastest FDM printer

null@example.com (kevintian1018) — Tue, 06 Jul 2021 04:01:10 +0000

Is Core xy really faster than other FDM printers? Creality Ender 7 said it can print in 250mm/s. Is it true?

An Automatic (motorized ) spool holder for 3d printers

null@example.com (3dlabs.es) — Tue, 06 Apr 2021 03:44:53 +0000

Hello people,

I show u here the Auto Feeder project which is at kickstarter now

https://www.kickstarter.com/projects/75 … uto-feeder

Full size 3d printed boat

null@example.com (Tin Falcon) — Sun, 17 Nov 2019 17:00:20 +0000

University of Maine 3d prints 25 ft long boat in 72 hours ,Weight 5000 pounds.

Interesting straight gantry , tilted print head printing at an angle like a belt printer and vent hoses to draw fumes. Looks like the print was fully attended. Looks like a complex feed system feeding pellet's to the ingersol extruder.

Patents

null@example.com (Tom_Mazanec) — Sun, 25 Aug 2019 13:07:56 +0000

When I first got interested in 3D Printing a few years ago (I even gave a Toastmasters speech on the topic) I read a lot of excitement about patents that were about to expire.
Any patents expired/expiring in the last/next 18 months or so?
And also, what "future patent" would you most like to see?