2015-02-15T16:06:51Z PunBB https://www.soliforum.com/topic/9916/led-strip-issues/ Same here, used super glue to re-attach...

]]> https://www.soliforum.com/user/614/ 2015-02-15T16:06:51Z https://www.soliforum.com/post/85364/#p85364 Time for some guerrilla glue...it wont be going anywhere once that stuff dries

]]> https://www.soliforum.com/user/9377/ 2015-02-13T16:39:33Z https://www.soliforum.com/post/85105/#p85105 Yep, I experienced exactly the same thing.   The first print I did with the lid and door closed the LED strip dropped right off.    I just taped mine back up for now.

]]> https://www.soliforum.com/user/9013/ 2015-02-13T06:05:12Z https://www.soliforum.com/post/85038/#p85038 I didn't realize they'd used a stick-on LED strip...  yeah those will all end up drooping after a while from the heat.

]]> https://www.soliforum.com/user/9188/ 2015-02-12T20:55:57Z https://www.soliforum.com/post/84945/#p84945 Mine was like this when I opened the box. The adhesive is just goo. For a temp fix I scotch taped it in place. I do not look forward to cleaning up the goo.

]]> https://www.soliforum.com/user/2942/ 2015-02-12T19:40:22Z https://www.soliforum.com/post/84928/#p84928 So, here's a new one. I'd been printing with everything open for a while, and getting middling results. I decided to do some "all doors closed" prints to see how they turned out, and it's looking like I'm getting substantially the same results - with one exception. The LED strip's adhesive is degooping in the heat from the enclosed chamber, and the strip's falling off the mount. I can stick it back on, but still - it's seeming like Yet One More Thing To Worry About with this printer.

]]> https://www.soliforum.com/user/9161/ 2015-02-12T18:59:04Z https://www.soliforum.com/post/84924/#p84924